AudioFu Chart · November 2026
Best Measurement Microphones 2026
The top pick is PreSonus PRM1 Precision Reference Measurement Microphone ($74). Behringer ECM8000 Omnidirectional Measurement Microphone gives you the most for the money at $22. Earthworks Audio M23 Gen2 leads the high end. Ranked by the AudioFu Index from 21 models across 15 brands, prices checked every night.
Last updated: November 16, 2026
Narrow the chart
All Measurement MicrophonesTop 10
Full detail for the 10 highest AudioFu Index scores. Every other model is listed below.
-
PreSonus PRM1 Precision Reference Measurement Microphone
PRM1 · Presonus
6 for sale on Reverb1 finish at Thomann
- Size4"
The Presonus PRM1 is a condenser measurement mic with a 1/4" ball capsule. It is built to work with Virtual StudioLive or Smaart, so it suits you if you tune rooms or PA systems with those tools. It comes with a clamp, foam windscreen and hard case, which helps you carry it and set it up.
Pros
- Condenser design with a 1/4" ball capsule
- Frequency range stated as 20 Hz to 20 kHz
- Maximum SPL of 132 dB handles loud sources
Cons
- Designed to work with Virtual StudioLive or Smaart, so other setups are not its focus
-
Behringer ECM8000 Omnidirectional Measurement Microphone
ECM8000 · Behringer
8 for sale on Reverb1 finish at Thomann
You get a small condenser microphone with an omnidirectional pickup pattern, so it hears sound from every side. It runs on phantom power between +15 V and +48 V, which most mixers and audio interfaces can supply. It comes with a storage box, which makes it a handy, budget-friendly pick for measurement work.
Pros
- Condenser design with omnidirectional polar pattern picks up sound from all directions
- Runs on phantom power from +15 V to +48 V, so no batteries are needed
- Low-noise XLR output with gold-plated contacts for a solid connection
Cons
- Needs phantom power from the mixer or interface to work
-
Audix TM1 Omnidirectional Test / Measurement Condenser Mic
TM-1 · Audix
4 for sale on Reverb2 finishes at Thomann
The Audix TM-1 is a condenser mic made for testing, measuring and recording rooms. It picks up sound from every direction, so you can capture the whole space around it. If you analyse rooms or record ambient sound, you will find it a good fit, as long as you can supply 18-52 V phantom power.
Pros
- Pre-polarised 6mm condenser capsule suits test and measurement work
- Omnidirectional pattern picks up sound from all directions
- Precision machined nickel-plated brass housing
Cons
- Needs 18-52 V phantom power to run
65AudioFu
IndexStableno change since Aug 17Aug 17$275 now$275€249 at Thomann · in stockCheck price ↗ -
- Weight0.15 kg
The Superlux ECM999 is a condenser mic made for measurement, and it also works for recordings and room sound analysis. It has an omnidirectional pattern, a 20 to 20,000 Hz range, and a peak level of 132 dB, so it can handle loud sources. If you want an affordable mic for measuring rooms or simple recording, this one suits you, as long as your gear can supply phantom power.
Pros
- Omnidirectional pattern picks up sound from all directions
- Phantom power operation means no batteries are needed
- Clip and windscreen are included in the box
Cons
- Needs phantom power from your mixer or audio interface to run
-
Beyerdynamic MM 1 Omnidirectional Measurement Microphone
MM 1 · beyerdynamic
6 for sale on Reverb1 finish at Thomann
The beyerdynamic MM 1 is a condenser mic made for calibrating sound systems and measuring sound levels and frequency curves. It uses an omnidirectional pattern and comes with a case, mount, and measurement chart. If you need to check how a room or a PA system performs, this is the kind of tool that fits the job.
Pros
- Omnidirectional polar pattern picks up sound evenly from all directions
- Wide 20–20,000 Hz frequency range for measuring across the full audio band
- Rated to a max SPL of 122 dB for loud sources
Cons
- Needs 12–48 V phantom power to operate, so a compatible preamp or interface is required
61AudioFu
IndexStableno change since Aug 17Aug 17$242 now$242€219 at Thomann · in stockCheck price ↗ -
Neumann MA 1 Studio Monitor Alignment Microphone
MA 1 · Neumann
5 for sale on Reverb1 finish at Thomann
The Neumann MA 1 is a calibrated measurement microphone that helps you align a stereo monitor system automatically. It works with Neumann KH 80 DSP monitors and other analog Neumann monitors paired with the KH 750 DSP subwoofer, and it runs on MAC or PC. If you own that kind of monitor setup and want it aligned for you, this is a good fit.
Pros
- Automatic monitor alignment calibrates stereo setups with Neumann KH 80 DSP monitors
- Calibration algorithms were developed together with Fraunhofer IIS
- Individually calibrated measurement microphone with a space-adaptive target curve
Cons
- Optional multichannel extension is sold separately and not included
58AudioFu
IndexStableno change since Aug 17Aug 17$330 now$330€299 at Thomann · in stockCheck price ↗ -
- Size4"
This is a condenser measurement mic with an omnidirectional pattern, so it picks up sound from every direction. It covers 20 to 20,000 Hz and handles up to 128 dB, which makes it a fit if you need to measure or capture a wide range of sources. It comes with a battery and shock mount holder, and it runs on 4LR44 6V batteries.
Pros
- Omnidirectional pattern picks up sound from all directions
- Frequency range of 20 to 20,000 Hz
- Includes a battery and shock mount holder
Cons
- Runs on 4LR44 6V batteries, so keep spares on hand
-
- Size8"
This is a condenser measurement microphone that picks up sound from every direction. It covers a wide range, from 5 to 35,000 Hz, and handles loud sources up to 140 dB. It needs phantom power to run, so it suits you if your mixer, interface or preamp can supply 48 V or 12 V and you want a mic for measuring sound.
Pros
- Omnidirectional polar pattern picks up sound evenly from all directions
- Wide frequency range of 5 to 35,000 Hz within plus or minus 1 dB
- Handles up to 140 dB SPL with 48 V phantom power
Cons
- Maximum SPL drops to 133 dB when run on 12 V phantom power
55AudioFu
IndexStableno change since Aug 17Aug 17$695 now$695€629 at Thomann · in stockCheck price ↗ -
- Size4"
The t.bone MM-1 is an omnidirectional measurement microphone with a polarised 1/4" condenser capsule. It covers 20 to 20,000 Hz and comes with a holder and a measurement protocol. If you need a budget-friendly mic for measuring rooms or gear, this one suits that job.
Pros
- Polarised 1/4" condenser capsule suits measurement work
- Omnidirectional pattern picks up sound from all directions
- Frequency range of 20 - 20,000 Hz covers the full audible band
Cons
- Needs phantom power between +9 V and +52 V to operate
- Weighs 188 g, so the stand you use should hold it steadily
-
This mic is a good fit if you use an NTI XL2 and need a measuring mic that works with it. It is Class 2, covers 20 to 20,000 Hz, and handles up to 146 dB. It comes with a holder and windscreen, so you can get set up quickly.
Pros
- Class 2 measurement microphone built for NTI XL2 systems
- ASD function lets you read out calibration data on the XL2
- Omnidirectional pattern with a 20 to 20,000 Hz frequency range
Cons
- Needs 48 V DC phantom power to operate
42AudioFu
IndexStableno change since Aug 17Aug 17$771 now$771€698 at Thomann · in stockCheck price ↗
All 21 measurement microphones
Same index, same nightly prices — compact. Colour options of one model share a row. Tap a photo to zoom.
- 11
NTI Audio Mini SPL with CertificateNTI Audio42Stable$828€749$828€749Check ↗
- 12
NTI Audio M2211NTI Audio42Stable$1,822€1,649$1,822€1,649Check ↗
- 13
Behringer ECM ProBehringer40Stable$65€59$65€59Check ↗
- 14
Mipro MM-100Mipro40Stable$275€249$275€249Check ↗
- 15
Earthworks Audio M30 Gen2Earthworks Audio40Stable$883€799$883€799Check ↗
- 16
Audient RM1Audient37Stable$54€49$54€49Check ↗
- 17
IK Multimedia MEMS Microphone for ARC SystemIK Multimedia37Stable$81€73$81€73Check ↗
- 18
Sonarworks SoundID Ref Measurement MicroSonarworks37Stable$94€85$94€85Check ↗
- 19
DBX DriveRack RTA-MDBX37Stable$138€125$138€125Check ↗
- 20
Haun MBNM 550 ELHaun36↑ 2.1%$529€479$529€479Check ↗
- 21
Mipro ACT-5801 Measurement BundleMipro33Stable$894€809$894€809Check ↗
Measurement Microphones by the numbers
Measured across all 23 models we track, not a sample.
Median $242 — half of all measurement microphones here cost less.
How to choose the best measurement microphones
Frequency Response
It's not just 'flat' - look for consistency across the spectrum. A slight bump in the low-end might sound nice, but it'll throw off your measurements and make correcting your room a nightmare. We want a mic that's as neutral as possible, revealing the truth, not coloring it.
Self-Noise (Equivalent Input Noise)
This is critical. A noisy mic will mask subtle room reflections, making it harder to identify problem areas. Lower is always better - especially if you're dealing with a less-than-ideal acoustic environment. Think of it like a noisy preamp; it just adds unwanted gunk.
Dynamic Range
How loud can it handle before distorting? For acoustic measurements, you're generally not dealing with insane SPLs, but a decent dynamic range ensures accuracy across a wider range of levels. A mic that clips easily won't give you a complete picture.
Polar Pattern
Cardioid is standard, but omnidirectional is often preferred for room analysis as it captures a more complete picture of the sound field. Figure-8 can be useful for phase correlation tests, but it's a more advanced technique. Consider what you're measuring.
Build Quality & Capsule
A cheap plastic body and a poorly manufactured capsule will likely introduce noise and inconsistencies. While a capsule isn't something you'll necessarily hear, it will impact the mic's accuracy. A robust build also means it'll survive gigging, if you ever need to take it on the road.
Buying guide
So, you're looking to dial in your room, your monitors, your entire signal chain? A measurement mic isn't a luxury; it's a tool for serious improvement. Forget trusting your ears alone - even the most seasoned engineer can be fooled by room modes and phase issues. This guide breaks down what to look for in a measurement microphone, so you can stop chasing phantom problems and actually hear what's happening.
Don't fall for the hype - a high price tag doesn't guarantee accuracy. Many 'studio-grade' mics are colored and inconsistent. Start with a reputable brand known for neutrality, and remember that software processing (like room EQ) is only as good as the data you feed it.
Spending a little more upfront on a truly accurate mic will save you headaches (and money) in the long run by preventing you from making incorrect adjustments.
How the AudioFu Index works
Five measured signals and nothing else — no stars from strangers, no “tested by experts” we didn’t do. The weights are fixed and public. We don’t play these instruments; we measure the market around them.
This chart covers 23 measurement microphones from the Thomann catalogue. Before you buy, read hands-on reviews and, where you can, play it. Full methodology.
AudioFu earns a commission when you buy through our Thomann links. It never changes the order — the index does.
- Demand40%
How many of this exact model are for sale on Reverb right now — what musicians actually buy and resell.
- Lineup20%
How many finishes Thomann stocks — makers expand the models that sell.
- Price15%
Where the price has moved since we started tracking in August.
- Specs15%
How completely the maker documents it.
- Maker10%
How deep the brand’s range is in this category.
Questions
Do I really need a measurement mic, or can I just use a regular condenser?
While a decent condenser can work in a pinch, a dedicated measurement mic is designed for accuracy and low self-noise - things that are crucial for reliable room and system analysis. The compromises with a regular condenser will muddy your results.
What's the difference between a USB measurement mic and an XLR mic?
USB mics are convenient for quick measurements in a bedroom setup, but XLR mics generally offer better performance and more flexibility. You'll need an audio interface for XLR, but the improved signal-to-noise ratio is often worth it.
How do I calibrate my measurement mic?
Calibration is essential for accurate results. Many mics come with calibration files; otherwise, you'll need to use a known reference and adjust your software accordingly. It's a bit of a rabbit hole, but a crucial one.
What software do I need to use with a measurement mic?
Room EQ Wizard (REW) is the industry standard and it's free. Other options include Sonarworks SoundID Reference and Dirac Live, but REW is a great place to start and handles most common tasks very well.
Can I use a measurement mic for recording vocals or instruments?
While technically possible, measurement mics aren't designed for that purpose. Their focus is on neutrality, which often translates to a clinical, sterile sound. You'll get better results with a mic designed for recording.





