Thomann Cyber Deals1,092 deals checked against 80 nights of prices, 898 at their lowest since August898 at their lowestOpen the boardEnds in 15 days

AudioFu Chart · November 2026

Best Crossovers for Advanced 2026

The top pick is dbx DriveRack 260 Loudspeaker Management System ($992). the t.racks DSP 4x4 Mini gives you the most for the money at $132. Ranked by the AudioFu Index from 11 models across 3 brands, prices checked every night.

Last updated: November 15, 2026

11models in this chart
3brands
$275median price
1price drops since Aug

Narrow the chart

All Crossovers Showing: For Advanced · clear

Top 10

Full detail for the 10 highest AudioFu Index scores. Every other model is listed below.

  1. dbx DriveRack 260 Loudspeaker Management System

    Driverack 260 · DBX

    17 for sale on Reverb1 finish at Thomann

    • Size19"

    If you run a PA for live shows or installs, this unit is worth a look. It handles crossover, EQ, compression, and limiting, and its Auto-EQ can tune your speakers and room for you. It suits you best if you want your speakers set up quickly and safely with an easy screen to work from.

    Pros

    • Auto-EQ tunes the speakers and room automatically for you
    • Built-in real time analyser and pink noise generator for room measurement
    • Up to 2.7 seconds of configurable delay on the signal path

    Cons

    • Room tuning needs a separate measuring microphone with phantom power
    91AudioFu
    Index
    • Demand100
    • Lineup100
    • Price50
    • Specs100
    • Maker83
    Stableno change since Aug 17
    Aug 17$992 now
    $992€898 at Thomann · in stock
    Check price ↗
  2. the t.racks 8x8 Matrix

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Size19"

    If you run a PA system and need to route eight inputs to eight outputs, this matrix processor is worth a look. It handles EQ, gain, delay, noise gate and feedback control on the input side, and output-side crossover, compressor and limiter controls too. It fits in a standard 19-inch rack space, so it suits a fixed install or a rack-based setup.

    Pros

    • Eight mic/line inputs with switchable 48V phantom power supply
    • Eight inputs and eight outputs in one 19-inch, 1 U rack unit
    • Input side covers high-cut, low-cut, PEQ, feedback suppression, noise gate, gain, mute, phase, delay and link

    Cons

    • Installation depth of 25.7 cm needs enough space behind the rack
    64AudioFu
    Index
    • Demand30
    • Lineup100
    • Price50
    • Specs100
    • Maker100
    Stableno change since Aug 17
    Aug 17$695 now
    $695€629 at Thomann · in stock
    Check price ↗
  3. dbx 234xs XLR Stereo 2/3 Way / Mono 4-Way Crossover

    234 Xs · DBX

    17 for sale on Reverb1 finish at Thomann

    • Size19"

    If you run a PA system and need to split your audio into bands, this crossover can do the job for you. It has a 40 Hz low-cut filter on both channels, a phase reverse switch on every output, and six XLR outputs, so you can send signal to several amps or speakers. It fits a standard 19-inch rack, which makes it a good match for a fixed setup or a rig you take on the road.

    Pros

    • Three-way stereo or four-way mono setup gives flexible routing options
    • 40 Hz low-cut filter on both channels cuts unwanted low frequencies
    • Phase reverse switch on all outputs helps you correct phase issues

    Cons

    • Takes up one rack unit of space, since it is a 1U, 19-inch format unit
    91AudioFu
    Index
    • Demand100
    • Lineup100
    • Price50
    • Specs100
    • Maker83
    Stableno change since Aug 17
    Aug 17$275 now
    $275€249 at Thomann · in stock
    Check price ↗
  4. the t.racks DSP 408

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Size19"

    The t.racks DSP 408 is a digital loudspeaker management unit with four XLR inputs and eight XLR outputs. It mounts in a standard 19-inch rack in one unit of height, and you can control it through USB, RS232/485, or Ethernet. It suits you if you run a PA system and need to split and manage signals for several speakers.

    Pros

    • Four XLR inputs and eight XLR outputs for routing signals to several speakers
    • 96 kHz sampling rate and 32 Bit DSP processing
    • 24 Bit AD/DA converter for the audio path

    Cons

    • Its 480 x 45 x 245 mm body needs a 19-inch rack space of one unit
    64AudioFu
    Index
    • Demand30
    • Lineup100
    • Price50
    • Specs100
    • Maker100
    Stableno change since Aug 17
    Aug 17$507 now
    $507€459 at Thomann · in stock
    Check price ↗
  5. the t.racks DSP 206

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Size19"

    You get a digital speaker management system with two inputs and six outputs, so you can split and route signal to your speakers. It mounts in a standard 19-inch rack in a 1 RU space, and it connects by USB, serial or Ethernet, so it suits you if you run a sound system and want to control it from a computer or network.

    Pros

    • Digital speaker management with 32-bit DSP processing inside
    • Two XLR inputs and six XLR outputs for flexible speaker routing
    • 96 kHz sampling rate with a 24-bit AD/DA converter

    Cons

    • Its 1 RU, 19-inch rack format needs a rack to mount in
    70AudioFu
    Index
    • Demand30
    • Lineup100
    • Price88
    • Specs100
    • Maker100
    ↓ 12.5%since Aug 17 · lowest so far
    $353 · Aug 17$308 now
    $308€279 at Thomann · in stock
    Check price ↗
  6. the t.racks DSP 204

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Size19"

    If you run a small PA and want to shape and route your speaker signal, the t.racks DSP 204 is built for that job. It takes two XLR inputs, sends signal out through four XLR outputs, and you can control it by computer or over a network. It fits a standard 19 inch rack, so it suits a fixed install or a tidy rack-based setup.

    Pros

    • Digital loudspeaker management system with a 32 Bit DSP for processing audio
    • Two XLR inputs and four XLR outputs for routing signal to speakers
    • 24 Bit AD/DA converter with a 96 kHz sampling rate

    Cons

    • Only two inputs, so it suits small setups rather than large mixing systems
    64AudioFu
    Index
    • Demand30
    • Lineup100
    • Price50
    • Specs100
    • Maker100
    Stableno change since Aug 17
    Aug 17$329 now
    $329€298 at Thomann · in stock
    Check price ↗
  7. dbx 223xs XLR Stereo 2-Way / Mono 3-Way Crossover

    223 Xs · DBX

    14 for sale on Reverb1 finish at Thomann

    • Size19"

    You get a 1U rack crossover that splits your signal into two-way stereo or three-way mono. It has an internal power supply, so you plug it in and run it, with balanced XLR connections for the cable runs. It suits anyone building a PA system who wants to split a signal between speakers and a subwoofer.

    Pros

    • Two-way stereo or three-way mono operation covers both stereo and sub setups
    • 24 dB per octave Linkwitz-Riley filters give steep, defined crossover slopes
    • Balanced XLR inputs and outputs suit long cable runs in PA rigs
    88AudioFu
    Index
    • Demand94
    • Lineup100
    • Price50
    • Specs100
    • Maker83
    Stableno change since Aug 17
    Aug 17$219 now
    $219€198 at Thomann · in stock
    Check price ↗
  8. dbx 234s Stereo 2/3 Way / Mono 4-Way Crossover

    234s · DBX

    11 for sale on Reverb1 finish at Thomann

    • Size19"

    If you run a PA system and need to split your signal between speakers and a sub, this crossover is built for that job. It works in 3-way stereo or 4-way mono, and its balanced jacks and phase reverse switch on every output help you connect and line up your speakers. Its 1U rack format means it suits a fixed setup more than a portable rig.

    Pros

    • 3-way stereo or 4-way mono operation covers flexible speaker setups
    • Linkwitz-Riley 24 dB/octave filter gives steep, defined crossover slopes
    • Balanced input and output jacks suit long cable runs in PA systems

    Cons

    • Mounts in a 19-inch rack, so it suits a fixed installation rather than a portable rig
    85AudioFu
    Index
    • Demand86
    • Lineup100
    • Price50
    • Specs100
    • Maker83
    Stableno change since Aug 17
    Aug 17$242 now
    $242€219 at Thomann · in stock
    Check price ↗
  9. the t.racks DSP 4x4 Mini

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Weight0.6 kg

    The t.racks DSP 4x4 Mini is a small digital signal processor with four channels, four balanced inputs and balanced outputs. You set it up over USB from a Windows computer, and it runs on the 12 V power adapter that comes in the box. If you need a compact box to manage a PA system and you have a Windows computer, this one is worth a look.

    Pros

    • Four balanced 6.3 mm jack inputs and four balanced 6.3 mm jack outputs for flexible routing
    • Programmed over USB, so you set it up from a Windows computer
    • Compact and light at 0.6 kg and 160 x 150 x 40 mm

    Cons

    • Programming requires a Windows computer, since it is not compatible with Mac
    64AudioFu
    Index
    • Demand30
    • Lineup100
    • Price50
    • Specs100
    • Maker100
    Stableno change since Aug 17
    Aug 17$132 now
    $132€119 at Thomann · in stock
    Check price ↗
  10. the t.racks DSP 4x4 Mini Pro

    the t.racks

    Not on Reverb yet1 finish at Thomann

    • Weight1.2 kg

    This is a small 4-channel DSP with four XLR inputs and four XLR outputs. You can set it up from a Windows computer over USB, and you can switch presets with the three front buttons or the rear contact inputs. It suits you if you run a PA system on Windows and want a compact unit you can rack-mount in one space.

    Pros

    • Four balanced XLR inputs and four balanced XLR outputs for routing four channels
    • Very compact construction that fits a small footprint
    • Programmable over USB from a Windows computer for setting up your processing

    Cons

    • USB programming works only on Windows, so it is not compatible with Mac
    64AudioFu
    Index
    • Demand30
    • Lineup100
    • Price50
    • Specs100
    • Maker100
    Stableno change since Aug 17
    Aug 17$176 now
    $176€159 at Thomann · in stock
    Check price ↗

All 11 crossovers

Same index, same nightly prices — compact. Colour options of one model share a row. Tap a photo to zoom.

  1. 11
    Behringer CX2310 Super X Pro V2Behringer
    Index 58Stable
    58
    Stable$93€84
    $93€84Check ↗

Crossovers by the numbers

Measured across all 11 models we track, not a sample.

Price distribution

Median $275 — half of all crossovers here cost less.

1
1
1
3
2
0
2
1
<$100$100–150$150–200$200–300$300–400$400–500$500–750$750+
Size19"

median of 8 models · 19"–19"

How to choose the best crossovers

Filter Slope & Type

Beyond the basic Butterworth, you want options - Linkwitz-Riley for phase coherence, Bessel for transient response. The slope (order) dictates how aggressively frequencies are attenuated, impacting driver blending and potential for unwanted artifacts. Too aggressive a slope can smear your low-end; too gentle and your drivers will fight.

Phase Response & Alignment

This is critical. Misaligned phase will make your sound muddy and smear your imaging. Look for crossovers with adjustable phase, and understand how to use it-it's not just about getting the bass to 'hit' harder, it's about ensuring everything reinforces properly.

Driver Protection & Limiting

Real-world gigs are unpredictable. Built-in limiting and driver protection features are a huge sanity saver, preventing you from blowing a speaker during a particularly energetic set. It's not about compromising tone, it's about preventing catastrophic failure.

Routing Flexibility & Signal Flow

Advanced players often have complex setups - multiple subs, distributed arrays, bi-amp systems. The crossover needs to handle this with ease, offering flexible routing, multiple inputs/outputs, and the ability to create complex signal chains. You don't want to be fighting the crossover while the band's playing.

DSP Capabilities (Beyond EQ)

Many modern crossovers pack serious DSP-compression, gating, feedback suppression. These tools can be game-changers for live sound, but also add to the learning curve. It's about knowing when and how to use them effectively, not just throwing effects at the problem.

Buying guide

Okay, so you're past the basic powered mixers and feeling the limitations. You want to dial in your PA with surgical precision, shaping your sound beyond just EQ knobs. Crossovers are the key, but they aren't a simple plug-and-play deal - they're a rabbit hole of phase response, filter slopes, and driver matching. Let's talk about what advanced players really need in a crossover and some models that can handle the complexity.

Don't cheap out here. A poorly designed crossover can actively hurt your system's performance. Look for models with solid build quality, reputable preamps, and a well-documented feature set.

The learning curve is steep, so invest in a unit with a good manual and online support - you'll need it. And be honest with yourself about your skill level; a fully-loaded DSP crossover is overkill if you're just starting to experiment.

How the AudioFu Index works

Five measured signals and nothing else — no stars from strangers, no “tested by experts” we didn’t do. The weights are fixed and public. We don’t play these instruments; we measure the market around them.

This chart covers 11 crossovers from the Thomann catalogue. Before you buy, read hands-on reviews and, where you can, play it. Full methodology.

AudioFu earns a commission when you buy through our Thomann links. It never changes the order — the index does.

  • Demand40%

    How many of this exact model are for sale on Reverb right now — what musicians actually buy and resell.

  • Lineup20%

    How many finishes Thomann stocks — makers expand the models that sell.

  • Price15%

    Where the price has moved since we started tracking in August.

  • Specs15%

    How completely the maker documents it.

  • Maker10%

    How deep the brand’s range is in this category.

Questions

What's the difference between a crossover and an EQ?

An EQ shapes the overall frequency response. A crossover splits the signal and sends different frequencies to different drivers. They work together, but are fundamentally different tools.

I'm hearing weird phase issues. What am I doing wrong?

Most likely, your phase alignment is off. Start with small adjustments (5-10 degrees) and listen carefully for improvements in clarity and imaging. It's a subtle process, and it takes time.

Do I need a crossover if my speakers are already 'bi-amped'?

Even bi-amped speakers can benefit from a crossover to fine-tune driver blending and EQ. The built-in crossover in the amplifier is often a compromise; an external crossover gives you much more control.

What's the deal with Butterworth vs. Linkwitz-Riley crossovers?

Butterworth offers a smoother roll-off but introduces phase shift. Linkwitz-Riley maintains more consistent phase response, which is generally preferred for better imaging and transient response, especially in stereo setups.

Can I use a crossover for recording?

Absolutely. It allows for incredibly precise speaker design and driver optimization for studio monitoring, but be aware of potential latency introduced by the DSP.

Related charts

#1 · AudioFu Index 91dbx DriveRack 260 Loudspeaker Management System · $992€898
Check price ↗
 Check price ↗

Magazine

Popular charts

Press / on any page to search.