AudioFu Chart · November 2026
Best the t.racks Crossovers 2026
The top pick is the t.racks DSP 206 ($307). the t.racks DSP 4x4 Mini gives you the most for the money at $131. the t.racks 8x8 Matrix leads the high end. Ranked by the AudioFu Index from 6 models, prices checked every night.
Last updated: November 21, 2026
Top 6
Full detail for the 6 highest AudioFu Index scores. Every other model is listed below.
-
- Size19"
You get a digital speaker management system with two inputs and six outputs, so you can split and route signal to your speakers. It mounts in a standard 19-inch rack in a 1 RU space, and it connects by USB, serial or Ethernet, so it suits you if you run a sound system and want to control it from a computer or network.
Pros
- Digital speaker management with 32-bit DSP processing inside
- Two XLR inputs and six XLR outputs for flexible speaker routing
- 96 kHz sampling rate with a 24-bit AD/DA converter
Cons
- Its 1 RU, 19-inch rack format needs a rack to mount in
70AudioFu
Index↓ 12.5%since Aug 17 · lowest so far$351 · Aug 17$307 now$307€279 at Thomann · in stockCheck price ↗ -
- Weight0.6 kg
The t.racks DSP 4x4 Mini is a small digital signal processor with four channels, four balanced inputs and balanced outputs. You set it up over USB from a Windows computer, and it runs on the 12 V power adapter that comes in the box. If you need a compact box to manage a PA system and you have a Windows computer, this one is worth a look.
Pros
- Four balanced 6.3 mm jack inputs and four balanced 6.3 mm jack outputs for flexible routing
- Programmed over USB, so you set it up from a Windows computer
- Compact and light at 0.6 kg and 160 x 150 x 40 mm
Cons
- Programming requires a Windows computer, since it is not compatible with Mac
64AudioFu
IndexStableno change since Aug 17Aug 17$131 now$131€119 at Thomann · in stockCheck price ↗ -
- Weight1.2 kg
This is a small 4-channel DSP with four XLR inputs and four XLR outputs. You can set it up from a Windows computer over USB, and you can switch presets with the three front buttons or the rear contact inputs. It suits you if you run a PA system on Windows and want a compact unit you can rack-mount in one space.
Pros
- Four balanced XLR inputs and four balanced XLR outputs for routing four channels
- Very compact construction that fits a small footprint
- Programmable over USB from a Windows computer for setting up your processing
Cons
- USB programming works only on Windows, so it is not compatible with Mac
64AudioFu
IndexStableno change since Aug 17Aug 17$175 now$175€159 at Thomann · in stockCheck price ↗ -
- Size19"
If you run a small PA and want to shape and route your speaker signal, the t.racks DSP 204 is built for that job. It takes two XLR inputs, sends signal out through four XLR outputs, and you can control it by computer or over a network. It fits a standard 19 inch rack, so it suits a fixed install or a tidy rack-based setup.
Pros
- Digital loudspeaker management system with a 32 Bit DSP for processing audio
- Two XLR inputs and four XLR outputs for routing signal to speakers
- 24 Bit AD/DA converter with a 96 kHz sampling rate
Cons
- Only two inputs, so it suits small setups rather than large mixing systems
64AudioFu
IndexStableno change since Aug 17Aug 17$328 now$328€298 at Thomann · in stockCheck price ↗ -
- Size19"
The t.racks DSP 408 is a digital loudspeaker management unit with four XLR inputs and eight XLR outputs. It mounts in a standard 19-inch rack in one unit of height, and you can control it through USB, RS232/485, or Ethernet. It suits you if you run a PA system and need to split and manage signals for several speakers.
Pros
- Four XLR inputs and eight XLR outputs for routing signals to several speakers
- 96 kHz sampling rate and 32 Bit DSP processing
- 24 Bit AD/DA converter for the audio path
Cons
- Its 480 x 45 x 245 mm body needs a 19-inch rack space of one unit
64AudioFu
IndexStableno change since Aug 17Aug 17$504 now$504€459 at Thomann · in stockCheck price ↗ -
- Size19"
If you run a PA system and need to route eight inputs to eight outputs, this matrix processor is worth a look. It handles EQ, gain, delay, noise gate and feedback control on the input side, and output-side crossover, compressor and limiter controls too. It fits in a standard 19-inch rack space, so it suits a fixed install or a rack-based setup.
Pros
- Eight mic/line inputs with switchable 48V phantom power supply
- Eight inputs and eight outputs in one 19-inch, 1 U rack unit
- Input side covers high-cut, low-cut, PEQ, feedback suppression, noise gate, gain, mute, phase, delay and link
Cons
- Installation depth of 25.7 cm needs enough space behind the rack
64AudioFu
IndexStableno change since Aug 17Aug 17$691 now$691€629 at Thomann · in stockCheck price ↗
Crossovers by the numbers
Measured across all 11 models we track, not a sample.
median of 8 models · 19"–19"
How the AudioFu Index works
Five measured signals and nothing else — no stars from strangers, no “tested by experts” we didn’t do. The weights are fixed and public. We don’t play these instruments; we measure the market around them.
This chart covers 6 crossovers from the Thomann catalogue (of 11 in the category). Before you buy, read hands-on reviews and, where you can, play it. Full methodology.
AudioFu earns a commission when you buy through our Thomann links. It never changes the order — the index does.
- Demand40%
How many of this exact model are for sale on Reverb right now — what musicians actually buy and resell.
- Lineup20%
How many finishes Thomann stocks — makers expand the models that sell.
- Price15%
Where the price has moved since we started tracking in August.
- Specs15%
How completely the maker documents it.
- Maker10%
How deep the brand’s range is in this category.
Questions
What should I look for when buying crossovers?
Key factors include build quality, sound characteristics, playability, brand reputation, warranty coverage, and value for money. Consider your musical style, skill level, and intended use to find the best match.
How much should I spend on crossovers?
Budget depends on your needs and experience level. Beginners can find quality options for $200-500, intermediate players should consider $500-1500 range, while professionals often invest $1500+ for premium features.
Are expensive crossovers worth the investment?
Higher-priced crossovers typically offer better materials, craftsmanship, and performance. They're worth it if you're serious about music, perform regularly, or need professional-grade features.
What are the best brands for crossovers?
Top brands combine quality, innovation, and reliability. We evaluate brands based on build quality, sound performance, durability, and customer satisfaction to recommend the best options for different budgets.
Should I buy crossovers online or in-store?
Both have advantages. Online offers better prices and selection, while stores allow hands-on testing. We recommend researching online first, then testing in stores if possible. Many online retailers offer excellent return policies.





