Product Description

• Multiband Stereo Expander
• Mid/Side Modulator
• And Low-End Tightener What Is WidthShaper? Define your stereo image in ultimate detail with WidthShaper 3. Take control with three bands of mid/side stereo adjustment
• each driven by its own drawable LFO and envelope follower. Use it on single tracks and buses
• for sound design
• mixing and mastering. Running inside Cableguys' ShaperBox 3 effects plugin
• use WidthShaper on its own or with other Shapers — they all work in exactly the same way
• stacking up to create elaborate
• multilayered effects that'll make your productions stand out. Do All This With WidthShaper Get tight mono bass Widen your top end Expand your drums Create super-stereo risers Go Wide! WidthShaper gives you natural "sides-only" stereo widening that's always mono-compatible
• even at extreme settings. Waveforms That You Design Cableguys' easiest ever waveform-editing tools make it simple to draw the exact movements you want to hear. Get any mid/side modulation you can imagine in just a few clicks. Locks To The Beat Sync your waveforms to beats and bars so they're always locked to your track. Go from 1/4 note pumping to 8 bar risers and beyond
• all with sample accuracy. Follows Any Rhythm Trigger your waveforms in any pattern at all using MIDI. Or use powerful new audio triggering that tightly tracks the rhythm of drums
• loops
• instruments – even full mixes. Widens Dynamically Use Envelope Followers to dynamically widen beats
• loops
• melodies – anything. Increase the stereo width as volume increases. Now with analogue-like Adaptive Release. Features New! Redesigned interface with larger editing areas Interface resizable from 75% to 200% Retina/HiDPI support for crisp
• clear graphics Built-in help — over any control for description Wave Presets covering all common uses 9 slots to store Custom Waves
• saved with the patch Switch User Waves via MIDI Dry/wet mix for each band New! Master Mix with improved algorithm
• for artifact-free creative blends New! Bypass for click-free switching to the dry signal Solo bands for easy setup accurate spectrum view Large
• precise oscilloscope view with Magnitude mode and Freeze option Expandable LFO for detailed editing Draggable Width parameter to shift the entire LFO wave up/down Set LFO loop length in beats and bars
• or Hertz/ms LFO loop length from 1/128 to 32 bars
• with sample-accurate sync Audio-rate modulation up to 5.24kHz for extreme sound design Trigger to reduce clicks when switching/triggering Waves 2x/3x button — double or triple patterns with a click Flip/resize/move/randomize wave or selection Copy/paste waves between any Shapers Unlimited undo/redo for LFO wave edits Selection skewing
• for easily increasing intensity over time System Requirements Mac Mac OS X 10.13 or later (64-bit only) Intel or Apple Silicon processor VST 2
• VST 3
• AU or AAX host DAW Windows Windows 7
•  10 or 11 (64-bit only) VST 2
• VST 3 or AAX host DAW Note:  ShaperBox is used as the example. Mac 1. Head to the Cableguys registration page and enter your email address and serial number which can found in your Plugin Boutique account > click 'Register'. 2. You have now registered an account with Cableguys > click 'User Account' to log in. 3. Enter your registered email address and password > Click 'Log in'. 4. Click 'DOWNLOAD' to access your software installer and then click 'LICENSE FILE' to download your key for activating the plugin. 5. Once downloaded
• run the .dmg installer > click 'Continue'. 6. Check you are happy where the contents will be installed and then click 'Install'. 7. Once the installation has concluded > click 'Close'. 8. If prompted
• enter your password for your login > click 'Install Software'. 9. Launch your Cableguys plugin within your chosen DAW > click 'Choose License File'. 10. Browse and find your .lic license file which you downloaded and unzipped earlier. Select the file > click 'Open'. 11. Confirm that your email address is correctly listed and then click 'Yes'. 12. Click 'OK'. 13. Exit the plugin and then launch it again. Your product will now be activated. Windows 1. Head to the Cableguys registration page and enter your email address and serial number which can found in your Plugin Boutique account > click 'Register'. 2. You have now registered an account with Cableguys > click 'User Account' to log in. 3. Enter your registered email address and password > Click 'Log in'. 4. Click 'DOWNLOAD' to access your software installer and then click 'LICENSE FILE' to download your key for activating the plugin. 5. Once downloaded
• extract the contents from the .zip file and run the .exe installer. Select your destination location > click 'Next >'. 6. Confirm where you wish to install the 32-bit VST2 plugin > click 'Next >'. 7. Confirm where you wish to install the 64-bit VST2 plugin > click 'Next >'. 8. Select which components/formats you wish to install > click 'Next >'. 9. Confirm you are happy with the installation settings > click 'Install'. 10. Once the installation has concluded > click 'Finish'. 11. Launch your Cableguys plugin within your chosen DAW > click 'Choose License File'. 12. Browse and find your .lic license file which you downloaded and unzipped earlier. Select the file > click 'Open'. 13. Confirm that your email address is correctly listed and then click 'Yes'. 14. Click 'OK'. 15. Exit the plugin and then launch it again. Your product will now be activated.

Additional Information

About the Cableguys WidthShaper 3

The Cableguys WidthShaper 3 combines traditional design with modern performance for Stereo Width enthusiasts.

Why Choose the Cableguys WidthShaper 3?

• •Authentic Cableguys craftsmanship and design
• •Versatile sound suitable for multiple musical genres
• •Professional build quality and reliable performance
• •Part of Cableguys's respected Stereo Width lineup

Compare & Explore

Browse our complete selection of Cableguys instruments or explore other Stereo Width options. Use our comparison tools to find the perfect match for your musical style and budget.