Source Audio

• 5 Selectable delay types: Oil Can, Reverse, Tape, Analog, Digital
• 7 Selectable reverb types: Room, Hall, True Spring, Plate, Shimmer, E-Dome, Swell
• 2 Identical 56 bit signal processors allow the simultaneous use of 2 effect types
• 8 Presets accessible via effect pedal - 120 additional presets available via MIDI
• Controls for Delay, Feedback, Tone, Control 1, Control 2 and Mix
• 12-Way rotary switch for selecting the effect engines
• Tap tempo division toggle-switch
• Toggle-switch knob determines which effect the knobs should change
• Preset select button
• Delay/tap foot-switch
• Reverb foot-switch
• Status LEDs
• Housing made of brushed anodised aluminium
• Universal Bypass, selectable between analog-buffered or relay-
• Switched true bypass
• Inputs: 2x 6.3 mm TRS stereo
• Outputs: 2x 6.3 mm TRS Stereo
• MIDI IN and MIDI THRU connectors
• Mini USB port for connection to PC (Windows and Mac compatible) and Remote Control (MIDI)
• Remote Control input: 6.3 mm TRS
• 3.5 mm Source audio control input for connection to compatible source audio devices (NeuroHub, Hot Hand)
• Power supply via 9 V DC (SR SA 153) Power supply unit with 2.1 x 5.5 mm hollow plug, polarity (-) internal
• Current consumption: 280 mA
• Dimensions (L x W x H): 114 x 114 x 51 mm
• Weight: 450 g
• Includes power supply

Note: Battery operation is not supported.

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the warranty to 4 years.

• Passive operation
• 2x Jack outputs
• Output for connection to the sensor-in of a source audio effect
• Dimensions: 25.4 cm x 10.2 cm x 7.6 cm

• Reverb
• 12 internal reverb engines
• Additional Engines accessible online via Neuro App or Desktop Editor
• 2 identical 56-bit signal processors
• Allows simultaneous use of 2 reverb engines
• 8 presets accessible via controller interface
• S120 more available via MIDI
• Seamless, unlimited spillover of reverb trails when switching to another engine
• Controls for time, pre-delay, treble, control 1, control 2 and mix
• 12-way rotary switch for selecting the reverb engine
• A / A + B / B toggle switch to select between the two processors / 2 different reverb engines
• Preset bank select button
• On / Off footswitch
• Footswitch option (programmable with tap tempo, reverb hold or A / B processor selection)
• Front-sided control input select button
• Front-side EXP input select switch (switch / pedal in / EXP)
• Aluminium casing
• Status LEDs
• 2 x 6.3 mm TRS stereo inputs
• 2 x 6.3 mm TRS stereo outputs
• MIDI IN and MIDI THRU connectors
• MiniUSB port for connection to PC (Windows and Mac compatible) and remote control (MIDI)
• 6.3 mm TRS remote control input
• 3.5 mm Source Audio Control Input for connection to compatible source audio devices (NeuroHub, Hot Hand)
• Power supply via included 9V DC (Source Audio SA 153) power supply with 2.1 x 5.5 mm barrel connector and polarity (-) inside
• Current consumption: 280 mA
• Dimensions (L x W x H): 114 x 114 x 51 mm
• Weight: 450 g
• Includes 3.5mm to 6.3mm TRS cable for connecting to a mobile device

• Completely configurable
• 128 multi-pedal "Scenes" presets can be stored
• Brushed anodized aluminum body
• High-contrast LCD display
• Status LEDs
• Keys: Mode, Edit, Confirm, Cancel, Add and Remove
• Previous, Next, Search and Favorite / Tap (Tempo) Footswitch
• Completely configurable with editor software (for Windows and Mac) via USB port
• USB-MIDI interface
• 1 MIDI IN port
• 2 MIDI OUT connectors
• 6.3 mm input for expression pedal
• 3.5mm input for TRS expression pedal
• 3.5 mm NEURO APP input
• Incl. 9 V DC power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• 5V DC Bus Power (USB)
• Current consumption: 70 mA
• Dimensions (L x W x H): 267 x 95 x 70 mm
• Weight: 1 kg
• Colour: Black

• One series
• 3 Different chorus types can be selected via toggle switch
• Voluminous / hypnotic chorus sounds unified in classic mode and others in dual and quad mode
• Stereo signal
• USB port for connection to the computer and for firmware updates
• MIDI-capable via optional Soundblox HUB with up to 128 memory slots (not included)
• Other parameters and algorithms via NeuroMobile app (iOS & Android) and PC and Mac controllable
• Connection to the smartphone is via its headphone jack
• Controls for effect speed / modulation depth / resonance and delay
• Multi-function jacks for connecting SourceAudio Hot handheld controllers or the Toolblox DualExpression for real-time control of modulation or any controller
• Universal bypass: on request analogue buffered or relay-switched true bypass possible
• Brushed aluminum housing / anodised
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incl. 9 V DC power supply

• 10-Band equalizer
• 10 Editable frequency bands from 31 Hz to 16 kHz with +/- 18 dB boost/cut per band
• Parametric control options change frequency range or Q-factor
• 4 onboard presets - or 8 in preset extension mode
• 128 MIDI presets
• Additional, adjustable +12 dB clean boost
• Completely MIDI-capable
• External expression and switching control
• Integrated noise gate, limiter and tuner
• Output and control knobs for EQ parameters
• Select/Save button
• Status LEDs
• Universal bypass
• Selectable between analogue-buffered or relay-switched true bypass
• 2 x 6.3 mm TRS stereo jack inputs
• 2 x 6.3 mm TRS stereo jack outputs
• MIDI IN and MIDI THRU connections
• Mini USB port for connection to PC (Windows and Mac compatible) and remote control (MIDI)
• 3.5 mm source audio control input for connection to compatible source audio devices (dual expression pedal, tap switch)
• Power supply via 9V DC (SR SA 153) power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Power consumption: 165 mA
• Housing made of brushed anodised aluminium
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incldues power supply unit

Note: Battery operation is not supported.Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Digital spring reverb
• 3 Different Spring Reverb modes
• Secondary tremolo rule functions for all knobs
• MIDI compatible via Source Audio Neuro Hub
• Additional parameters and algorithms controllable via Neuro Mobile App (available for iOS and Android)
• Connection to the smartphone is via its headphone jack
• Universal Bypass, selectable between analog-buffered or relayed True Bypass
• 56-Bit processor and 24 bit converter
• Controls for Mix, Level, Dwell and Tone
• Toggle switch for switching between Short, Long and Tank
• Bypass footswitch
• Brushed anodized aluminium body
• 6.3 mm Mono jack L / R inputs / outputs for multiple routing options
• 3.5 mm TRRS socket for expression control signal via Hot Hand 3 or Expression Pedal for external real-time control of assignable parameters
• Control input button on the pedal end
• Mini USB port for PC connection (Windows and Mac compatible)
• Power supply via supplied 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption: 165 mA (up to 195 mA with Hot Hand Wireless Adapter)
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Weight: 280 g

Note: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

• Multiband Processor
• 37 Different options to split the frequency bands
• Frequency band splitting specially adapted for bass
• 44 Selectable distortion / overdrive / fuzz effects
• Dual channel compressor / expander with versatile control options
• Multiband tremolo with adjustable time options and selectable beat patterns
• Adjustable LFO module
• Sound morphing feature offers the possibility to switch between two sounds with an expression pedal envelope follower or LFO
• 8-Band graphic EQ
• Adjustable noise gate
• Universal bypass, selectable between analogue-buffered or relay-switched true bypass
• Controls for drive, level, mix (bass), treble (mid)
• All controls can be freely assigned to different parameters in each preset
• Preset toggle switch for 6 onboard presets
• ALT control key activates secondary function of pots
• Bypass footswitch
• Status LED
• Brushed anodised aluminium housing
• 6.3 mm Mono jack L/R inputs/outputs for multiple routing options
• 3.5 mm TRRS jack for expression control signal via Hot Hand 3 or expression pedal for external real-time control of assignable parameters
• Mini USB port for PC connection (Windows and Mac compatible)
• Power supply via included 9V DC power supply (SR SA 153), 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption 150 mA
• Dimensions (L x W x H): 114 x 70 x 51 mm

Note: Battery operation not supportedNote Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• One series
• 3 Different phaser types can be selected via toggle switch
• Stereo signal
• USB port for connecting to computer and firmware updates
• MIDI-capable via optional Soundblox HUB with up to 128 memory slots (not included)
• Further parameters and algorithms via NeuroMobile app (iOS & Android) and PC and Mac controllable
• Connection to the smartphone is done via the headphone jack
• Controls for effect speed / modulation depth / resonance and delay
• Multi-function jacks for connecting SourceAudio Hot handheld controllers or the Toolblox DualExpression for real-time control of modulation or any controller
• Universal bypass: on request analogue buffered or relay-switched true bypass possible
• Casing: Brushed / anodised
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incl. 9 V DC power supply

• 3 different distortion types selectable via toggle switch: Tube mode for classic / gentle tube distortion / heavy mode for aggressive germanium fuzz sounds with ample low-end and fuzz mode for modern, synth-like sounds
• Stereo signal
• USB port for connection to computer and firmware updates
• MIDI-capable via optional Soundblox HUB with up to 128 slots (not included)
• Further parameters and algorithms can be controlled via Neuro Mobile App (iOS& Android) and PC und Mac
• Can be connected to a smartphone via the headphone jack
• Controls for Drive / Clean / Tone and Level
• Multi-function jacks to connect Source Audio Hot handheld controllers or the Toolblox DualExpression for real-time control of modulation or any controller
• Universal bypass: on request analogue buffered or relay-switched true bypass possible
• Brushed aluminum housing / anodised
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incl. 9 V DC power supply

• Controls the LFO in Source Audio One Series modulation effects
• Switches additional distortion engines on Source Audio One Series distortion effects
• Scrolls through presets on the Source Audio Nemesis Delay or serves as a Momentary Hold switch
• Changes slider settings virtually to preset on all Source Audio One Series effects
• Operation: Normally open (NO), SPST switch, Momentary footswitch (SPST)
• Metal housing
• 3.5 mm TRRS output for connection to Source Audio One Series modulation effects
• No power needed
• Dimensions (L x W x H): 64 x 57 x 51 mm
• Weight: 180 g
• Including 3.5 mm TRRS connection cable

• Compressor
• Switchable mode for guitar or bass
• Bass Mode adapts all factory presets for use with an electric bass: adjusted dynamic range and attack characteristics
• 6 Selectable compressor styles: 2x Optical, 1x VCA, 1x FET, 2x Dual-Band including LA2A Optical Compression for warm, smooth compression
• 1176 Feedback FET Compression - extremely fast attack
• LED Optical Compressor - similar concept to LA2A, but with faster, 'dirtier' attack and rackmount VCA-style compression (fast attack with hard knee)
• Two selectable dual compressor modes can be used either serially, in parallel or as a band split
• Additional compressor types available via the Neuro Editor
• Direct access to all relevant compressor parameters
• Auto Makeup Gain automatically increases or decreases the makeup gain, depending on the amount of compression applied
• Look Ahead Compression creates an imperceptible latency in the signal that 'looks ahead' and allows for a particularly fast and smooth attack without additional distortion or artefacts
• Side Chain Compression uses the signal from Input 2 to trigger the compression of the signal from Input 1
• 3-Band parametric EQ or 8-band graphic EQ available via Neuro Editor
• Adjustable noise gate
• Neuro Desktop Editor or Neuro Mobile App to create, save and share presets
• Full MIDI capabilities with the Source Audio Neuro Hub
• Controls for threshold, ratio (tone), blend (attack), output (release)
• Preset toggle switch for 6 onboard presets
• ALT control key activates secondary function of the pots
• Bypass footswitch
• Status LEDs
• Brushed anodised aluminium body
• Universal bypass - selectable between analogue-buffered or relay-switched true bypass
• 2 Stereo inputs: 6,3 mm TRS jack
• 2 Stereo outputs: 6.3 mm TRS jack
• 1 Mini USB port for connection to PC (Windows and Mac compatible)
• 1 Control input for controlling up to four parameters with an external expression pedal: 3.5 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)
• Power supply via 9 V DC mains adapter
• Power consumption: 165 mA
• Dimensions (L x W x H) : 114 x 70 x 51 mm
• Incl. power supply unit

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 24 Delay engines
• 56-Bit signal path and 24-bit delay line processing
• 8 Presets accessible via the onboard controls
• 128 Presets available via MIDI
• Housing made of brushed anodised aluminium
• Universal Bypass
• Controls for: Time, Feedback, Mod, Rate, Intensity, Mix and Delay Engine Selection
• Status LED
• Tap Tempo LED
• Toggle switch for switching between beat divisions, which include quarter notes, dotted eighth and triplets
• Hold control for continuous looping
• Bypass foot switch
• Tap Tempo foot switch
• Preset bank select button
• 6.3 mm Stereo jack in-/ output
• MIDI IN and MIDI THRU connections
• Mini USB port for PC connection (Windows and Mac compatible)
• 6.3 mm TRS jack footswitch- or expression pedal input
• Switch for selecting external control units (expression pedal or footswitch)
• 3.5 mm Source Audio control input to connect with compatible Source Audio devices
• Compatible with Source Audio Hot Hand
• Compatible with the Neuro Mobile App (incl. a 3.5 mm to 6.3 mm TRS cable for connecting the mobile device)
• Power consumption: 200 mA
• Dimensions (L x W x H): 114 x 114 x 51 mm
• Weight: 450 g
• Incl. 9 V DC power supply (300 mA polarity (-) inside)

• Multiband processor
• 37 Different options to split the frequency bands
• 44 Selectable distortion / overdrive / fuzz effects
• Dual channel compressor / expander with versatile control options
• Multiband tremolo with adjustable time options and selectable beat patterns
• Adjustable LFO module
• Sound morphing feature offers the possibility to switch between two sounds with an expression pedal envelope follower or LFO
• 8-Band graphic EQ
• Adjustable noise gate
• Universal bypass, selectable between analogue-buffered or relay-switched true bypass
• Controls for drive, level, sustain (bass), treble (mid)
• All controls can be freely assigned to different parameters in each preset
• Preset toggle switch for 6 onboard presets
• ALT control key activates secondary function of pots
• Bypass footswitch
• Status LED
• Brushed anodised aluminium housing
• 6.3 mm mono jack L/R inputs/outputs for multiple routing options
• 3.5 mm TRRS jack for expression control signal via Hot Hand 3 or expression pedal for external real-time control of assignable parameters
• Mini USB port for PC connection (Windows and Mac compatible)
• Power supply via supplied 9 V DC power supply (SR SA 153), 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption 150 mA
• Dimensions (L x W x H): 114 x 70 x 51 mm

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Manages up to 5 Source Audio One Series and Soundblox 2 pedals simultaneously
• 128 Multi-Pedal "Scenes" Presets can be stored
• Presets MIDI Program Change commands and via USB port via Mac, PC and iPad (with separately available Camera Kit) editable
• Compatible (except Scenes function) with Source Audio Soundblox 1 and Soundblox Pro Pedals
• Status LEDs
• Control buttons for Recall Last / Copy and Scan Devices / Save Scene
• Standard 5-pin MIDI IN and OUT / THRU
• Passive expression input and hot hand-held input
• 6.3 mm stereo
• 10k-50k ohms
• Linear Expression pedal input
• Mini USB port
• 5x 4-pin 3.5 mini-jack multi-function outputs
• 3.5 mm sensor input for hot hand
• Power supply with 9V DC power supply 2.1 mm x 5.5 mm Hollow plug, polarity (-) inside (included)
• Current consumption: 40 mA (up to 80 mA with Hot hand accessories)
• Dimensions (W x L x H): 96 x 53 x 35 mm
• Weight: 170 g
• System requirements: Windows Vista, 7, 8, 8.1 or 10; Mac 10.7, 10.8, 10.9, 10.10, or 10.11