NTI Audio

• Analyzed AES3, S / PDIF, TOS link
• ADAT Interface
• Sampling Frequency: 32-96 kHz
• Digital Audio Analysis
• Carrier Status Analysis
• Carrier Signal Measurement
• Dual Domain Monitor Speaker
• Comprehensive Event Logger

• Surround test sequences to check for Dolby Digital, Dolby Digital, Dolby E, Pro-Logic II, DTS and DTS-HR installations
• Synchronises AES3, DARS, word clock and video signals
• Measurement of channel transparency
• Signal delay and clock frequency
• Test signals for sine / noise and polarity
• Runtime measurement
• Power supply via 3x 1.5 V AA batteries (not included)
• Case and power supply available as an option

• NTI Audio 600000 336 ASD cable
• For XL2
• Length: 5 m
• Colour: Black

• Protects MR-Pro against 70V / 100V back-up voltage for impedance measurements

• For sound level (RMS, relative, peak), THD+N, VU & PPM, frequency, signal balance, polarity via built-in microphone
• Time and frequency sweep
• 1/3 Octave spectrum and envelopes
• Acoust. SPL and Leq measurement only available with Mini SPL (available on option 154763)
• Input: XLR and RCA
• Power supply via 3x 1.5 V AA battery (not included)
• Case on option 154773

• For XL2 systems
• Class 2
• Frequency range: 20 - 20,000 Hz
• Polar pattern: Omnidirectional
• Max. SPL: 146 dB
• Impedance: 100 Ohm balanced
• Phantom power: 48 V DC
• Length: 150 mm
• Diameter: 20.5 mm

• For XL2
• For an efficient and fast charge of the Li-Po battery
• Incl. Replacement battery

• Class 2
• Class 1 frequency response
• Frequency range: 5 - 20,000 Hz
• Omnidirectional
• Max. SPL 144 dB
• Impedance 100 Ohm, balanced
• 48 VDC phantom power
• Removable capsule
• Metal diaphragm
• Length: 150 mm
• Diameter: 20.5 mm

• With omnidirectional characteristics according to IEC 60651
• Type II
• For ML1
• Calibrated
• Battery power
• For acoustic and sound level measurements
• Incl. Micro-clamp and certificate, case

• With sine, pink and white noise
• Delay test signal
• Polarity test signal
• Sweep signal for every frequency range
• Cable test function
• Impedance and power measurement
• Phantom power test
• Load independent output level
• 512 MB Flash-Memory with USB terminal ( for storage of wave files and configurations )
• Graphical back-lit display
• Inputs: XLR and USB
• Outputs: XLR and RCA
• Operates with 3x 1.5 v AA batteries (not included)
• Including bumper, USB cable and hand loop
• Separately available accessories: Belt bag, power supply and cable test plug
• Optional PSU: Art.240762

• Suitable for NTI MR 2 / PRO

• Includes measuring devices and accessories for precise acoustic measurements and inspection of analogue audio systems

Set includes:

• 1x XL2 audio- and acoustics-analyser
• M4261 class 2 measuring microphone
• Minirator MR-PRO signal generator
• ASD cable for XL2
• Cable test plug (MR-PRO)
• Power adapter XL2
• Power adapter MR-PRO
• Exel set case

• Includes devices and accessories for precise sound measurements and inspection of analogue audio systems
• Inlcudes set case

The set comprises:

• XL2 Audio- and acoustics-Analyser
• M2211 class 1 measuring microphone
• Minirator MR-PRO
• ASD cable for XL2
• Cable test plug (MR-PRO)
• Power adapter XL2
• Power adapter MR-PRO
• Exel systemkoffer

• For AL1/ML1 MR1, DL1/DL2, etc.

Note: Does not include audio system!

• For noise surveilance and checking of audio-Devices
• WAV-Recording for documentation of measured signals and comments onto memory card (2GB Mini-SD card included)
• Real time clock for documentation of all measured values
• Build in speaker for monitoring of measured signals
• Rechargeable Li-Po battery
• Programmable serial 1 bit I/O interface
• XLR in for optional measuring microphone
• Usb port
• Optional TosLink terminal
• Integrated speaker
• Device satisfies the following standards: IEC 61672, IEC 60651, IEC 60804, DIN 15905-5, DIN 45657-1, SLV 2007, ANSI S1.4, ANSI S1.43

• For noise surveillance and checking of audio-Devices
• Including M4261 measuring microphone class 2
• WAV-recording for documentation of measured signals and comments onto memory card (2GB Mini-SD card included)
• Real time clock for documentation of all measured values
• Build in speaker for monitoring of measured signals
• Rechargeable Li-Po battery
• Programmable serial 1 bit I/O interface
• XLR in for optional measuring microphone
• Usb port
• Optional TosLink terminal
• Integrated speaker

Device satisfies the following standards:

• IEC 61672
• IEC 60651
• IEC 60804
• DIN 15905-5
• DIN 45657-1
• SLV 2007
• ANSI S1.4
• ANSI S1.43

• Belt pocket for XL-2

• Sine
• Pink noise
• White noise
• Polarity test signal
• Delay test signal
• Graphics-capable backlit display
• XLR and RCA outputs
• USB input
• Powered by 3 batteries 1.5 V AA (not included)
• Compatible mains adapter: Article no. 240762 (not included)
• Compatible bag: Article no. 114577 (not included)

• For noise surveilance and checking of audio-devices
• WAV-recording for documentation of measured signals and comments onto memory card (2GB Mini-SD card included)
• Real time clock for documentation of all measured values
• Build in speaker for monitoring of measured signals
• Rechargeable Li-Po battery
• Programmable serial 1 bit I/O interface
• Integrated speaker
• XLR input for measuring microphones
• Usb port
• TosLink terminals
• Including M2211 measuring microphone class 1

Device satisfies the following standards:

• IEC 61672
• IEC 60651
• IEC 60804
• DIN 15905-5
• DIN 45657-1
• SLV 2007
• ANSI S1.4
• ANSI S1.43