MIDI Solutions

• Amplifies the MIDI signal for longer cable paths
• MIDI cables provide additional power if there is not enough power
• 1x MIDI In
• 1x MIDI Thru
• Requires 9 V power supply (not included, eg Art. 409939)

Note: also available as a set with matching power supply: Art. 258434.

• Programmable relay which can be opened or closed by MIDI events
• Supports Event Types: Note, Control Change, Program Change, System Exclusive, 1x MIDI In / 1x MIDI Out
• Relay connection: 6.3 mm mono jack
• 500 mA fuse
• Power supply via MIDI

• 8 Relays
• Programmable: Open and closed
• Event Types: Note, Control Change, Program Change, System exclusive
• Response times less than 2 ms
• Connection by 6.3 mm mono jack (tip and ring)
• Format: 19 "/ 1 HU

• 4 MIDI inputs
• 2 MIDI outputs
• It is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standard

• 8 Jack inputs for 8 foot switch
• Powered via MIDI

• Routes MIDI data from input A or B to a MIDI output
• MIDI inputs can be switched by means of a foot switch (not included) or MIDI program changes
• LED display
• Power supply via MIDI

• 1 MIDI input
• 8 MIDI Thru
• All MIDI data are forwarded from the input to all 8 Thru outputs
• Active circuit for long cable routes
• Power supply via MIDI
• LED activity indicator
• Compatible with 3.3 V and 5 V MIDI standards
• Construction: 19", 1U

• 6.3 mm stereo jack input for connecting two foot switches (not included)
• MIDI input and output

• To generate MIDI data based on the position of the pedal
• 1 x Midi-In
• 1 x pedal-In (6.3 jack)
• 1 x Midi Out
• Dimensions: 11.5 x 6.5 x 3.5 cm
• Weight: approx. 0.3 kg

• 1 MIDI input
• 4 MIDI outputs
• Active
• Is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standard

• 1 MIDI input
• 2 MIDI outputs
• Active
• Is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standards

• Jack input for footswitch
• Is then converted into MIDI
• Powered via MIDI

• Converts velocity data
• MIDI-powered

• 8 MIDI inputs
• 2 MIDI outputs
• All input MIDI signals are merged into one signal
• Processes also SysEx and MIDI Timecode
• Power is supplied via the MIDI cable
• Design: 19"/1U

• The Beat Indicator contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages.
• Allows the musician to keep in time with MIDI sequences during breaks or intros
• The flash can be advanced or delayed by up to 128 ms from the actual beat
• Is programmed via MIDI System Exclusive commands
• Settings are retained after switching off the device
• Can be reprogrammed with new settings as many times as needed

• 10 Setting MIDI Event Processor
• Filter, assign, and trigger MIDI events
• Transcriptions
• Assign bank selection commands, etc.
• Power supply via Midi

• 2 MIDI inputs
• 2 MIDI outputs
• Is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standard

• Selected MIDI commands/data can be routed to either both or only one output of the router
• 10 Settings can be saved
• Connections: 1x MIDI in und 2x MIDI out

• 32 Setting the MIDI Event Processor
• Power supply via MIDI
• To filter, assign, truncate, transfer notes, assign bank select commands, etc.

Bundle offer comprising

• Power Adapter
• Amplifies the MIDI signal for longer cable paths
• MIDI cables provide additional power if there is not enough power
• 1x MIDI In
• 1x MIDI Thru
• Requires 9 V power supply (not included, eg Art. 409939)

Note: also available as a set with matching power supply: Art. 258434.

• AC /PSA Power Supply for Effects Pedals
• Suitable for devices by Ibanez, Boss, Behringer and others
• 9 V DC / 1 A
• Connector: 5.5 mm / 2.1 mm
• Polarity: + outside
• Switching power supply technology