Lake People

• Ultra High Quality Class A Frontend Version
• Two-channel
• Extremely low-noise microphone preamp with excellent sound characteristics and deluxe features
• Ideal addition to mixers with unsatisfactory preamps or for "direct to tape" recording

• Electronically balanced input via XLR
• Gain 0 ... +66 dB switchable in 12 steps of 6 dB
• Deactivatable gain fine adjustment with centre-lock potentiometer +/- 5 dB
• Deactivatable Lo-Cut, 12 dB / oct. with variable use 12 ... 250 Hz
• Noise -129 dB at 60 dB gain
• Pad switch for -12 dB pre-attenuation
• Programmable intelligent muting system
• Phantom power 48 V switchable
• Phase reversal switchable
• 16-Level fast level meter
• 0 ... -36 dBr on the front, calibrated
• Additional separate clip display
• 2x balanced outputs via XLR
• Option: Transformer balanced outputs
• Option: Option: GP-I/0 eg for mute control / red light

• 2 x 2 Identical sections with two balanced inputs and one balanced output each (4 x 2 in 1)
• Front side is switchable from 2 x 2 in 1 to 4 in 1 (output signal can then be split to both outputs)
• Rear side inputs balanced symmetrically via XLR
• Optimised for line level signals
• Impedance: 20 kOhm
• Differentiation of the input signals with the highest common mode rejection (CMMR)
• Internal filters for band limitating to a safe and useful range from 5-40 kHz (-1 dB)
• Multiturn trimpots on the front for level adjustment in the range of -12 up to 12 dB
• Balancing of the output signals with optimised circuits for highest resistance - and voltage common mode rejection ratio
• IRT compliant output impedance of 30 ohms
• XLR input and output sockets with gold-plated contacts

• 2 x 1 in 4/4 x 1 in 2
• 2 x 2 Identical sections, each with one balanced input to two balanced outputs (4 x 1 in 2)
• Front switchable from 2 x 1 in 2 to 1 in 4
• Rear inputs balanced via XLR
• XLR input jacks with gold-plated contacts
• Optimised for line-level signals
• Impedance: 20 kOhm
• Differentiation of the input signals with highest common mode rejection
• Internal bandlimiting filter to a safe and reasonable range of 5 Hz -40 kHz (-1 dB)
• Front spindle trimmer for level adjustment in the range -12 to 12 dB
• Balancing of the output signals with optimised circuits for highest
• Resistance and voltage unbalance damping
• IRT compliant output impedance 30 ohms
• XLR output jacks with gold-plated contacts

Lake People G108 1-channel headphone amplifier; balanced headphone amplifier (4 output stages); supports headphones with impedances from 8 to 600 ohms; internal 7-way switchable gain; 25mm full aluminium knobs for volume and balance control; toggle switch for stereo, mono or phase swap (left channel) switching; connections: 2x line input XLR balanced, 2x line input RCA, 1x stereo headphone output 4-pin XLR balanced, 1x stereo headphone output 6.3 mm jack unbalanced; dimensions: 168 x 47 x 165 mm (W x H x D); weight: 1.4 kg

Lake People G103-P MKII; stereo headphone amplifier; five gains switchable (-6 / 0 / +6 / +12 / +18 dB) for low to high impedance headphones (16 to 600 ohms); LF frequency range 150 kHz (-3 dB); Alps potentiometer with good channel balance; switching power supply 115 / 230 V AC / 8 VA; connections: 2x line input XLR balanced (L/R stereo), 2x stereo headphone output 6.3 mm jack; dimensions: Case 105 x 42 x 165 mm (WxHxD), front panel 108 x 45 mm; Weight: 1 kg

• A 5-fold internally switchable gain (-6 / 0 / +6 / +12 / +18 dB) for low to high impedance headphones (16 to 600 Ohm)
• NF frequency range: 150 kHz (-3 dB)
• Alps potentiometer with good synchronisation
• Switching power supply: 115 / 230 V AC / 8 VA
• 2 Line inputs: Cinch unbalanced (L/R stereo)
• 2 Stereo headphone outputs: 6.3 mm jack
• Enclosure dimensions (W x H x D): 105 x 42 x 165 mm
• Front panel dimensions (W x H): 108 x 45 mm
• Weight: 1 kg