Diezel

• Front-loaded construction for a tighter, more focused sound, particularly suited to heavier music styles
• Equipment: 4 x 12" Celestion Vintage 30 loudspeaker
• Enclosed construction
• Power handling (mono): 240 Watt
• Power handling (stereo): 2 x 120 Watt
• Impedance (mono): 8 Ohm
• Impedance (stereo): 2x 16 Ohm
• Connections: 3 x 6.3 mm jack
• Case material: 18 mm African Okoume
• Dimensions: (WxHxD): 745 x 745 x 365 mm
• Weight: 43 kg
• Made in Germany

• For Diezel Hagen
• Direct switching function: Channel 1 to 4
• Master, Send and Mute
• Can be used with any jack cable

• 10 Rugged foot switches for program changes
• 2 Switch for bank up/ down
• Large blue-backlit LED display
• Diezel Herbert connection with regular XLR cable
• Also suitable as a "normal" MIDI board via MIDI cable (cable available on option, e.g., Art. 213368 for Columbus interface or Art. 129105 for MIDI)
• Does not work with ENGL amps

• Rear-loaded cabinets sound rounder, less focused and better suited to traditional music styles
• Equipped with: 4x12" Celestion V30 loudspeaker
• Rear loaded
• Rated power: 240W
• Mono: 8 Ohm
• Stereo: 2x 16 Ohm
• Dimensions: 745 x 745 x 365 mm
• Copes well with strong distortion and high volumes without sounding fuzzy
• Weight: 43 kg
• Made in Germany

• 3 Fully independent channels, including separate EQs
• Power: 180 Watts
• For perfectly selected sounds at any output level
• Preamp tubes: 5 x 12AX7
• Power tubes: 6 x EL34
• Channel 1 controls: Volume, treble, middle, bass, gain
• Channel 2 controls: Volume, treble, middle, bass
• Channel 3 controls: Volume, treble, middle, bass
• Mid cut: Intensity level
• Master: Volume 2, presence, deep, volume 1
• Parallel loop level
• Switches: Channel switch, ch.2 +/-, loop, mute, store
• Channels & Ch.2 +/- switchable via Midi
• Input: 6.3 mm Jack
• 3 Effects loop
• Serial FX loop send & return: 2 x 6.3 mm Jack
• Parallel FX loop send & return: 2 x 6.3 mm Jack
• Switchable FX loop send & return: 2 x 6.3 mm Jack
• Footswitch boost: 6.3 mm Jack
• Speaker outputs: 16 Ohm, 8 / 2x16 Ohm and 4 / 2x8 Ohm via 6.3 mm jack
• Tuner out: 6.3 mm jack
• Compensated out: 6.3 mm jack
• Midi In & Thru: 2 x 5-pin DIN
• Footswitch: XLR female
• Dimensions (W x D x H): 740 x 280 x 270 mm
• Weight: 25 kg
• Made in Germany

• Programmable, full analogue 4-channel tube amp with built-in DSP effects
• Up to 99 programmable presets
• IR output and tube power stage
• IR output can also be used without speaker
• Built-in tuner
• 64 High-quality IRs already pre-installed
• Channels: 4
• Power: 100 W
• Preamp tubes: 5 x 12AX7
• Power tubes: 4 x EL34
• Controls: Gain, master, bass, middle, treble, deep, presence, master, mid cut
• Effects: Compressor, reverb, phaser, flanger, delay, pitch shifter, tremolo, auto and remote controlled wah, gate, graphic EQ
• Speaker outputs: 1 x 16 Ohm, 1 x 8 Ohm (2 x 16 Ohm) and 1 x 4 Ohm (2 x 8 Ohm)
• Effects loop: Pre loop, FX loop A and B
• Input: 6.3 mm Jack
• Pre loop send / return: 2 x 6.3 mm Jack
• Loop A send / return: 2 x 6.3 mm Jack
• Loop B send / return: 2 x 6.3 mm Jack
• USB
• IR output
• Bluetooth
• MIDI In and Thru
• Input for Columbus Foot Controller
• Dimensions (W x D x H): 600 x 290 x 290 mm
• Weight: 24 kg
• Handmade in Germany

• For Diezel Herbert MK II and Diezel D Minor
• Direct switching function: Channel 1 to 3, Mid Cut, Master, Send and Mute
• Can be used with any mono jack cable (not included)

Note: does not work with the Herbert MK I.

• A faster attack makes this cabinet particularly suitable for deeper sounds or amps with an enormous bass
• Equipped with: 2x 12 Celestion Vintage 30 speaker
• Power rating: 120 W
• Impedance: Mono 16 ohm, Stereo 2x 8 ohm
• Dimensions (W x H x D): 74 x 59 x 31 cm

• 2 x 12" Celestion speaker V30
• 120 watts
• Mono: 16 Ohm
• Stereo: 2 x 8 Ohm
• Fast Attack, therefore is best suited for deeper moods or amps with enormous bass
• Dimensions (W x H x D): 74 x 59 x 31 cm
• Colour: Black

Diezel VH4 EL34 Head; electric guitar Head All Tube, HANDMADE, 100 Watt, 4x EL34 Tubes, Preamp 4 completely independent channels, with EQ Gain - treble - mid - Bass Volumen,additionally Bright switch in channel 2, insert Effect Loop each Channel, Speaker Out 4 - 8 - 16 Ohms, 4 insert Loops, Midi in & thru, Phantom Power, Size 75 x 30x 29 cm, Weight 25kg

• Power: 100 W
• 2 1/2 Channels
• Power tubes: 4 x EL34
• Preamp tubes: 6 x 12AX7
• One channel with gain, volume, treble, middle, bass from clean to slightly distorted
• One channel with 2 x gain, 2 x volume, treble, middle, bass
• The settings of channel 2A go from crunch to heavy crunch, channel 2B is the lead channel
• Mid cut (like Diezel Herbert) with Intensity and Level
• With an intensity set to 0, it can also be used as another master
• Presence and Deep Control in the power amp
• Two master volume controls
• Switchable via MIDI or Diezel Columbus via XLR connection or Footswitch Diezel FS7HE (functions can be called up from amp, except Store)
• Switchable effect loop serial or / and parallel
• Return level at the rear
• Speaker outputs: 2 x 4 Ohm, 2 x 8 Ohm, 1 x 16 Ohm
• Colour: Black
• Foot switch not included in the delivery - optionally available
• Matching case: Article no. 317408 - not included in the delivery

• Power: 100 W
• 2 Channels
• Power tubes: 4 x EL34
• Preamp tubes: 5 x 12AX7C-B
• Controls per channel: Gain, volume, treble, middle, bass
• Global controls: Master 1, master 2, presence, deep
• Speaker outputs: 16, 8 (2 x 16 Ohm) & 4 Ohm (2 x 8 Ohm)
• Serial FX loop
• Dimensions (W x D x H): 737 x 279 x 305 mm
• Incl. foot switch