Crazy Tube Circuits

• 3-Spring reverb tank pedal with tremolo
• Controls for volume, depth, speed, mix, tone and dwell
• 2 Separate expression pedal inputs for tremolo and reverb
• Robust metal housing
• Powered via a standard 9 V DC power supply (corresponding power supply: Article Nr 409939, not included, must be ordered as a separate item)
• Power consumption: 130 mA (9V)
• Dimensions: 170 x 73 x 125 mm
• Weight: 850 g
• Handmade in Greece

• Tube overdrive
• The same warm tube sound of the V1 with additional gain and volume boost for solos, as well as the same core circuit with a 12AY7 tube, but with an updated tone control for a wider range of bright sounds and an additional tight / fat switch to adjust the lower frequencies
• Controls: Gain, Tone, Volume, Boost Gain, Boost Volume
• Push buttons: Tight / Fat
• LED: Effect On, Boost On
• Footswitch: Effect bypass, boost
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply with 9 V DC power adapter (included)
• Dimensions (W x D x H): 95 x 124 x 54 mm
• Made in Greece

Note: Battery operation not supported

• Compressor
• Fully analogue circuit with 3 separate compressor circuits (FET, OTA, OPTO)
• Blend control for parallel compression
• Controls: Threshold, Ratio, Attack, Release, Blend, Volume
• Switch: FET/OTA/OPTO
• LED: Effect On
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 50 mA
• Power supply via 9 V DC mains adapter (not included, suitable mains adapter: Art. 409939)
• True bypass
• Dimensions (W x D x H): 125 x 72 x 55 mm
• Weight: 350 g
• Handmade in Greece

Note: No battery operation possible

• Classic tweed and brownface sound
• Volume control for gain
• Tone regulator for boosting higher frequencies
• Output controller for adjusting the output signal
• True bypass
• Effect On LED
• Effect bypass footswitch
• Input and output: 6.3 mm Jack
• Power adapter connection (female connector 5.5 x 2.1 mm, negative pole inside)
• Current consumption: 47 mA
• Power supply with 9 V DC power adapter (not included - matching power supply: Article Nr. 409939)
• Dimensions (W x D x H): 73 x 114 x 46 mm
• Weight: 260 g

Note: No battery operation possible.

• Chorus / Flanger, Delay and Reverb in one pedal
• Maximum delay time: 700 ms
• 3 Reverb algorithms: Exciter from the Splash mk3, Plate and Shimmer
• Amplifier / speaker simulation
• Controls: Volume, Mix, Time, More, Depth, Excite, Tail, Speed
• Push buttons: Ground Lift, Peaker Sim, -15db PAD, DI, Flanger / Chorus
• Switch: Exciter Shimmer Plate
• LED: Reverb, Delay, Mod Effect On
• Footswitch: Reverb, Delay, Mod
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Headphone output: 6.3 mm jack
• DI output: XLR
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 220 mA
• Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
• Dimensions (W x D x H): 144 x 123 x 58 mm
• Weight: 649 g
• Made in Greece

Note: Battery operation is not supported