LD Systems Stinger 282/18 Gala Set
Professional music gear - detailed information and where to buy
LD Systems
Stinger 282/18 Gala Set
Product Info
Article Number:
512515
Brand:
LD Systems
Model:
Stinger 282/18 Gala Set
Category:
Acoustic and Entertainer PA Sets
Price:
$4,460.50
* Prices may vary. Check retailer for current pricing and availability.
This Stinger 282/18 Gala set is a solid choice for bands and entertainers needing serious low-end punch. The built-in DSP makes setup easy, and the robust construction means it can handle the road. It's a great solution for pubs, clubs, and smaller outdoor gigs where you need substantial bass without hauling a ton of gear.
Product Description
LD Systems Stinger 282/18 Gala Set
*Bundle offer comprising*, 2x LD Systems Stinger Sub 18A G3
- *Active Subwoofer*
- Active bass reflex subwoofer with 18" speaker
- Integrated DSP
- Integrated Class-D power amp
- Power: 800 W RMS
- 1600 W Peak
- Max. SPL (sound pressure level): 135 dB
- Frequency range: 35 - 200 Hz
- Integrated DSP with the following protected circuit designs: limiter
- overheating
- overvoltage
- overcurrent
- Switchable high cut at 80 Hz
- 100 Hz and 120 Hz
- Switchable cardioid mode
- Connection panel with 2x mic/line combo inputs
- 2x XLR outputs
- PowerTwist input and output
- 18 mm Plywood housing
- Pole mounts with M20 threads
- Dimensions: 677 x 547 x 740 mm
- Weight: 42.6 kg
- Suitable protective cover available under Article Nr #409338# (not included)
- Suitable caster board available under Article Nr #409340# (not included)
- 2x LD Systems Stinger 28A G3
- *Active Full-Range Speaker*
- With bass reflex housing
- Equipped with: 2x 8" Speakers
- Integrated DSP
- Integrated Class D power amplifier
- Power: 500 W RMS
- 1000 W peak
- Maximum SPL: 131 dB
- Frequency range: 58 - 20
- 000 Hz
- Integrated DSP with the following protection circuits: Multiband limiter
- overheating
- overvoltage
- overcurrent
- Switchable operating modes: Full range
- satellite
- monitor
- flat
- BMS tweeter
- Coverage pattern (H x V): 90° x 50° degrees
- Connection panel with 2x Mic / Line combo input
- 1x XLR out and Power Twist power connection
- Plywood housing
- 36 mm dual tilt stand flange
- M10 Rigging points
- Dimensions: 270 x 756 x 290 mm
- Weight: 20.5 kg
- 2x Sommer Cable Monolith1 Power Twist/XLR 2
- *Audio/Power Combination Line*
- With 3x 1.5 mm² mains cable with PowerTwist-male to -socket and a balanced NF-line (3-pin/110Ω-capable)
- XLR male + PowerTwist to XLR female + PowerTwist
- Ideal for audio signals and power over cable
- Very flexible and enormously tread-resistant due to the round jacket made of cotton and viscose
- Good pairwise shielding through tinned copper spiral braiding
- Length: 2.5 m
*Technical data:*
- Sheath material; PVC
- Diameter: 14.5mm
- Number of inner conductors: 2 x 0.25 mm²
- Diameter power line: 7.0mm
- Diameter signal line: 3.8mm
- Copper braid per conductor (power supply): 56 x 0.15 mm²
- Copper braid per conductor (signal): 28 x 0.10 mm²
- Shielding signal: Cross braided
- Shielding factor (audio): 90"
- Temperature range: -30°C to +70°C
- Fire load per m: 0.64 KWh
- Weight per 1m: 222 g
- Sheath colour: Black
- 2x LD Systems Stinger 28 G3 PC
- *Protective Cover*
- For the LD Systems Stinger 2 x 8" G3
- Material: Nylon
- 8 mm Padding
- Reinforced grip recesses
- Practical inner pocket for accessories
- Dimensions (H x W x D): 290 x 750 x 310 mm
- Weight: 0.7 kg
- Colour: Black
- 2x LD Systems Stinger Sub 18 G3 PC
- *Nylon Protective Cover*
- Suitable for Stinger Sub 18" G3
- 8 mm Padding
- Dimensions (W x H x D): 576 x 470 x 625 mm
- Weight: 1.5 kg
- Colour: Black
- Roadworx Slim Line Speaker Stand Bag
- *Bag*
- For 2 Roadworx Slim Line Speaker stands
- With foam padding
- Outer material: Cordura - robust
- wear-resistant
- water-repellent nylon
- 2 Handles
- Support feet made from plastic
- Outer dimensions (L x W x H): 1000 x 200 x 150 mm
- Inner dimensions (L x W x H): 940 x 165 x 85 mm
- Weight: 0.85 kg
- Colour: Black
- 2x Roadworx Multi Pole
- *Distance rod*
- Length approx. 0.88 m to 1.36 m
- Height adjustment with safety splint
- Upper end: 35 mm
- Lower end suitable for 35 mm and M20 mountings
- Weight: 1.2 kg
- Colour: Black
PROS
- • Robust 18in drivers deliver substantial low-frequency extension.
- • Integrated DSP offers excellent protection and tonal shaping options.
- • Plywood construction ensures durability for frequent gigging.
- • PowerTwist connectivity simplifies cabling and power distribution.
CONS
- • The weight makes transport a challenge for solo performers or smaller vehicles.
- • Limited channel flexibility compared to more complex mixing systems.
- • While versatile, it's primarily geared toward live sound, less ideal for studio recording.
Product Video
Key Features
Power (Watts)
800 RMS / 1600 Peak
Speakers
2 x 18in Active Subwoofer
Channels
4 (2 mic/line combo inputs, 2 XLR outputs)
Effects
Integrated DSP with limiter, overheating, overvoltage, overcurrent protection; High cut filter (80/100/120Hz); Cardioid mode
Connections
2x Mic/Line Combo Inputs, 2x XLR Outputs, PowerTwist Input/Output
Weight
42.6 kg
Similar Products
DAS Audio EVENT-218A
Active Subwoofers
$4,288
Active Riggable 2x18" Subwoofer, Power: 1800 W RMS, 3600 W peak, Class-D amplifier, Max SPL: 140...
DAS Audio EVENT-M210A-230
Active Stage Monitors
$2,444
Active 3-Way Stage Monitor, Equipped with: 2 x 10" low-midrange drivers and 1.75" HT...
Frequently Asked Questions
The integrated DSP is convenient and effective for basic protection and shaping, but lacks the depth and flexibility of a dedicated outboard unit.
It provides a noticeable improvement in feedback rejection, but careful microphone placement and gain staging remain crucial.
They deliver a clean, powerful low-end with good articulation – not overly boomy, but certainly capable of shaking the floor.
