Aguilar Tone Hammer 700 V2
Professional music gear - detailed information and where to buy
Aguilar
Tone Hammer 700 V2
Product Info
Article Number:
593353
Brand:
Aguilar
Model:
Tone Hammer 700 V2
Category:
Solid-State Bassheads
Price:
$1,263.90
* Prices may vary. Check retailer for current pricing and availability.
The Tone Hammer 700 V2 is a powerhouse—seriously. Aguilar’s nailed the balance between clean power and tonal flexibility here. It's ideal for working pros and gigging bassists who demand headroom, precision, and a versatile EQ section without the fuss of tubes.
Product Description
- Aguilar Tone Hammer 700 V2
- Amp Head for Electric Bass
- Power: 700 watts into 2.67 and 4 ohm
- 350 watts into 8 ohm
- Minimum resistance: 2.67 ohm
- Preamplifier: Solid State
- Power amplifier: Class D
- Transformer: Switch mode power supply (SMPS)
- EQ range: Bass: +/- 17 dB at 40 Hz
- Mid level: +/- 16 dB
- Mid frequency: 180 Hz - 1 kHz
- Treble: +/- 14 dB at 4 kHz
- Drive control: fully adjustable
- with Aguilar's proprietary AGS (Adaptive Gain Shaping) circuitry
- Effect Loop: serial operation
- adds 6 dB of additional gain
- making it suitable for a wide range of effects devices
- Input: 6.35 mm jack
- Compatible with all active and passive basses
- 1 Neutrik speaker output
- Balanced outputs: 2 simultaneously usable D.I./XLR outputs with pre/post EQ and ground lift switch
- Tuner output
- USB-C interface for IR loader
- Cooling: two high-quality silent fans with thermal speed control
- Dimensions (W x D x H): 31.75 x 22.86 x 7.62 cm
- Weight: 2.57 kg
PROS
- • AGS circuitry delivers remarkably clean, articulate, and punchy low-end response.
- • The EQ is exceptionally flexible, allowing for precise tonal shaping across a wide spectrum.
- • Built with Aguilar's signature robust construction, ensuring long-term reliability on the road.
- • The integrated DI outputs provide exceptionally clean, usable signals for recording and live sound.
CONS
- • The substantial power output might be overkill for smaller, quieter gigs or home practice.
- • Its Class D design, while efficient, lacks the 'warmth' some prefer from tube amplification.
- • The weight, typical of high-powered heads, can be a burden for frequent transport.
Product Video
Key Features
Power (Watts)
700 watts into 2.67/4 ohms, 350 watts into 8 ohms
EQ Bands
3 (Bass, Mid, Treble) + Mid Frequency Sweep
DI Output
2 simultaneous XLR D.I. outputs with pre/post EQ and ground lift
Effects
Serial effects loop with +6dB gain
Speaker Output
1 Neutrik speaker output
Weight
Approximately 22 lbs
Similar Products
Kawai K-200 ATX 4 WDB Piano
Pianos
$9,119
Piano, With AnytimeX-4 equipment, Millennium III mechanics with ABS carbon parts of...
Manuel Rodriguez Superior Anniversario 120 J-SB
4/4 Size Classical Guitars
$1,099
Classical Guitar, Special model for the anniversary of Guitarras...
Ibanez GRG320FA-TVT
ST Style Guitars
$439
Electric Guitar, Body: Poplar, Top: Basswood with Art Grain in flamed maple look, Bolt-on neck:...
Taylor 814ce Special Edition Sedona
Other Acoustic Guitars
$5,499
*Note:* Register your Taylor guitar to extend your warranty to 12 years.
Frequently Asked Questions
AGS significantly tightens the low-end and reduces muddiness, resulting in a more defined and modern bass sound compared to earlier iterations.
It's genuinely useful; the +6dB boost allows for more aggressive effects processing, especially with darker or more subtle pedals, without losing signal strength.
A 4-ohm or 8-ohm cabinet rated for at least 400 watts will handle the power effectively, but start with something in the 200-300 watt range to dial in the volume.
