WES Audio

WES Audio ng500 Recording & Mixing Bundle; 500 module system fully equipped, for recording and analog mixing with digital recall function; consisting of: Titan 500 module rack, 2x Phoebe Class-A microphone / instrument / line preamps, 2x Mimas FET 1176 style compressor, Dione bus compressor, Rhea Stereo Vari-mu style tube compressor, Hyperion analog parametric equalizer; connections: 10x line input XLR, 10x line output XLR, USB, Ethernet; integrated power supply with 5A 115/230V; housing: 19" 3U

• ISP (Independent Slot Power) technology
• XLR input and output for each slot
• Additional sub DB-25 input and output for slot 1-8
• Integrated stereo link switch
• Linear 100 W switching power supply 115 V / 230 V.
• Format: 19" / 3 HE

• Includes recall function for WES audio module
• Stereo link function
• IAC (Internal Audio Connector) for free routing of audio signals to and from slots 1-8
• 10x Line input XLR
• 10x Line output XLR
• USB
• Ethernet
• Integrated power supply with 5A 115/230 V
• Construction: 19" 3U

WES Audio Phoebe; 1-channel Class-A microphone / instrument / line preamplifier with digital recall in 500 module format; 100% analogue microphone / line preamplifier: +28 dBu headroom; Mic Gain up to 75 dB; Carnhill input and output transformers; LED meter for output signal with clip indication; +48V phantom power switchable; Phase Reverse switch; switchable input impedance (1200 / 3000 ohms); Iron Pad (passive output attenuation circuit with 1 dB step, after output transformer); all controls / analogue settings are fully controllable via WesAudio GCon DAW plugin; connectors: 1x mic / instrument / line input XLR / 6.3 mm jack combo, mini-USB; design: 500 module; dimensions: 38 x 133 x 145 mm (WxHxD)

• GCon USB/Ethernet Protocol compatible
• Digitally controlled analogue circuitry
• Directly controllable from a DAW via USB via plug-in (VST2/VST3/AAX/AAX DSP/AU)
• Hardware A/B switch
• Digital side-chain
• 3 Touch-sensitive encoders with automation recording of Threshold, Mix and MakeUp in the DAW
• True bypass
• Analogue GR meter
• THD - Total Harmonic Distortion with 2 modes (medium and high)
• Mix button for parallel compression
• 24 dBu headroom
• Design: 500 Module

• FET 1176 Style Compressor
• Digitally controllable by VST / AAX plugin
• 1 channel
• Analogue circuitry digitally controlled
• Symmetric Carnhill input and output transformers
• A / B function
• Digital sidechain from the DAW to the compressor
• 4 touch-sensitive encoders
• Bypass switch
• VU / GR meters
• USB connection
• Incl. plugin for VST2 / VST3 / AU / AAX interface (PC / Mac)
• Construction: 500 series module

• Construction: 500 module
• 100% Analogue signal path with +24dBu headroom
• Carnhill input transformers
• THD - Harmonic Distortion with two modes (Medium and High)
• Side-chain filter (3 high pass filters at 60, 90 and 150 Hz)
• Mix control for parallel compression
• 4 Touch-sensitive encoders allow automation of certain parameters (Threshold, Mix, Make Up) in the DAW
• True-bypass
• Front mini-USB port for total recall function
• Compatible with Titan cabinet
• Power consumption: 190 mA
• Dimensions (W x H x D): 76 x 133 x 158 mm

• Stereo / dual mono can be used
• Headroom + 26dBu
• Quad VCA THAT 2181
• M / S mode switchable
• Two selectable output levels
• THD controls for each channel
• IRON mode for more saturation
• Mix Knob for parallel compression
• 3 HP filters (60, 90 and 150 Hz)
• 2 Tilt filters
• 5 Ratio settings (1.5: 1, 2: 1, 4: 1, 10: 1, infinite)
• VU meters per channel for input
• Output and Gain Reduction
• A / B / C comparison function
• 4 Touch-sensitive encoders per channel
• True bypass
• Remotely controllable via plug-in with total recall and automation function in the DAW
• 2 Line inputs: XLR
• 2 Line outputs: XLR
• 2 Side chain: 6.3 mm jack
• USB
• Ethernet
• Integrated power supply
• Format: 19", 3 U

• With digital recall function
• +24 dBu headroom
• Low section boost and cut: 20, 30, 60, 100, 120, 250 Hz
• High boost section: 2, 3, 4, 5, 8, 10, 12, 16 kHz
• High cut section: 4, 8, 12, 20 kHz
• Stereo / dual mono / mid-side modes
• Carnhill transformer
• 6 Touch-sensitive encoders
• Output volume control
• A/B button to switch between two settings
• Bypass switch
• THD button (total harmonic distortion) for more saturation
• Plug-in formats: AAX/AAX DSP/VST3/AU
• LED Meter for input, output, and clip display
• Design: 500 Series module

• Analogue parametric equaliser with +24 dBu headroom and digital recall function in 500 module format
• Stereo / Dual mono / Mid / Side operating mode
• Switchable gain range for 5 dB boost or 15 dB cut per band: HF - 2 kHz to 25 kHz (bell or shelf)
• HM - 600 Hz to 8 kHz with Q control
• LM - 200 Hz to 2.5 kHz with Q control
• LF - 30 Hz to 350 Hz (bell or shelf)
• High pass filter with 12 dB / Oct or 6 dB / Oct
• Bypass switch per EQ band
• Total harmonic distortion function for signal saturation
• 12 Touch-sensitive encoders allow automation recording
• DAW plugin in AAX / AAX DSP / VST3 / VST2 / AU format
• USB port
• Type: 500 module
• Dimensions (W x H x D): 76 x 133 x 158 mm

• Carnhill transformers
• 6386 tubes
• Single / double / triple mode
• Max. gain: 45 dB
• Max. gain reduction: 40 dB
• Switched, six-position release time selector
• Switchable side-chain high-pass filter
• Bypass function
• Link function
• Balanced XLR input and output
• Design: 19" / 2HE
• Dimensions (W x H x D): 483 x 88 x 235 mm
• Weight: 7 kg