AudioFu Chart · November 2026
Best Markbass 4x10 Bass Cabs 2026
The top pick is Markbass Standard 104HR 800-Watt 4x10" Bass Speaker Cabinet (8ohm) ($924). Ranked by the AudioFu Index from 4 models, prices checked every night.
Last updated: November 8, 2026
Top 4
Full detail for the 4 highest AudioFu Index scores. Every other model is listed below.
-
Markbass Standard 104HR 800-Watt 4x10" Bass Speaker Cabinet (8ohm)
Standard 104HR-8Ohm · Markbass
9 for sale on Reverb1 finish at Thomann
- Weight22 kg
This is a 4x10 bass cabinet with Neodymium speakers made by B & C and a 1-inch tweeter you can adjust side to side. It handles up to 800 W at 8 Ohm and covers 35 Hz to 20 kHz, so it suits bassists who want a compact cab for gigs or rehearsals. At about 22 kg, plan for the weight if you carry your own gear.
Pros
- Four 10-inch Neodymium speakers, custom made by B & C for this cabinet
- Laterally adjustable 1-inch HF compression driver tweeter
- Handles up to 800 W at 8 Ohm, with a 35 Hz to 20 kHz range
Cons
- Weighs about 22 kg, which is heavy to carry to gigs and up stairs
69AudioFu
IndexStableno change since Aug 17Aug 17$924 now$924€828 at Thomann · in stockCheck price ↗ -
Markbass Standard 104HF 800-Watt 4x10" Bass Speaker Cabinet (8ohm)
Standard 104HF-4 Ohm · Markbass
9 for sale on Reverb1 finish at Thomann
- Weight27.3 kg
This is a 4x10 bass cabinet with four neodymium speakers and a tweeter you can move side to side. It handles up to 800 W at 4 ohms and uses a front bass reflex design, so it suits bassists who want a large cab for stage or studio use. At 27.30 kg, it is a heavier choice for players who move their gear often.
Pros
- Four 10-inch neodymium speakers give it a strong low-end footprint
- Custom made speakers by B & C built for this cabinet
- Laterally adjustable 1-inch HF tweeter lets you adjust the high end
Cons
- At 27.30 kg and 59.5 x 74 x 48 cm, it is heavy to carry to gigs
69AudioFu
IndexStableno change since Aug 17Aug 17$1,004 now$1,004€899 at Thomann · in stockCheck price ↗ -
- Weight15.35 kg
You get a 4x10 bass cabinet with four neodymium speakers and a 1-inch hi-fi driver, rated for 800 W at 8 Ohm. It is made in Italy and has a biodegradable housing. It suits bass players who need a large, powerful cabinet and don't mind carrying 15.35 kg.
Pros
- Four 10-inch neodymium speakers for a full 4x10 bass cabinet setup
- Equipped with a 1-inch hi-fi driver for the high end
- Rated for 800 W at 8 Ohm, handling a lot of power
Cons
- At 15.35 kg and 57.8 x 60 x 47 cm, it is heavy and large to carry around
65AudioFu
Index↓ 1.3%since Aug 17 · lowest so far$836 · Aug 17$825 now$825€739 at Thomann · in stockCheck price ↗ -
- Weight22 kg
This 4x10 bass cabinet has four 10 inch neodymium speakers, rated at 800 Watts at 4 Ohm. You can adjust the 1 inch tweeter from side to side, and the rear bass reflex design covers 35 Hz to 20 kHz. Since it weighs 22 kg, it suits bass players who are ready to lift a heavy cab and want a large, high-power box.
Pros
- Four 10-inch neodymium speakers, custom made by B & C
- 800 Watt power rating at 4 Ohm impedance
- Laterally adjustable 1 inch HF compression driver tweeter
Cons
- Weighs 22 kg, so it is heavy to carry to gigs
52AudioFu
IndexStableno change since Aug 17Aug 17$889 now$889€796 at Thomann · in stockCheck price ↗
4x10 Bass Cabs by the numbers
Measured across all 26 models we track, not a sample.
Median $924 — half of all 4x10 bass cabs here cost less.
median of 25 models · 15.35 kg–37 kg
How to choose the best 4x10 bass cabs
Neodymium vs. Standard Drivers
Neodymium drivers (like in the Stage 104HP) offer significant weight savings, crucial if you're schlepping gear regularly. Standard drivers give you a bit more low-end thump for the money, but the weight difference is real. Think about your back.
Ported vs. Sealed Design
Most Markbass 4x10s are ported, which extends the low-end response and gives you that characteristic Markbass 'boom.' Sealed designs offer tighter, more controlled low-mids, better for super-articulate funk or slap styles, but you'll lose some low-end presence.
Speaker Configuration (Standard vs. HP)
The 'HP' designation (like in the Stage 104HP) means high-power neodymium drivers. These handle more wattage and generally offer a slightly cleaner, more extended frequency response before breakup, but they come at a premium.
Overall Headroom & Dynamics
Markbass cabs are known for their responsiveness. A good amp/cab combo will let you dig in and get some serious grit without completely muddying up the low end. This depends heavily on your head, but the cab's design plays a significant role in how that dynamic range unfolds.
Build Quality & Durability
Markbass isn't the cheapest brand, and that shows in the construction. The Baltic birch plywood is solid, the corners are well-reinforced, and the speaker frames are robust. You're paying for a cab that'll survive years of gigging, but even Markbass has had occasional quality control hiccups - check for consistent stitching and solid hardware.
Buying guide
Alright, so you're in the market for a Markbass 4x10 cab? Smart move. They're a staple for a reason - that signature Markbass punch is just right for a lot of players. But there's more than one version out there, and figuring out which one suits your gig and budget takes a little digging. Let's break down the best Markbass 4x10s you can get.
Don't chase the 'best' - chase the right cab for your needs. If weight is a major factor, the neodymium models are worth the extra cash. For a raw, powerful low-end, a standard-driver ported cab like the ProMag 104NF will do the trick.
Be honest about your headroom needs; pushing a smaller head too hard will just result in distortion and a muddy sound. And always, always check the speaker impedance to match your amp - a mismatch can fry things.
How the AudioFu Index works
Five measured signals and nothing else — no stars from strangers, no “tested by experts” we didn’t do. The weights are fixed and public. We don’t play these instruments; we measure the market around them.
This chart covers 8 4x10 bass cabs from the Thomann catalogue (of 26 in the category). Before you buy, read hands-on reviews and, where you can, play it. Full methodology.
AudioFu earns a commission when you buy through our Thomann links. It never changes the order — the index does.
- Demand40%
How many of this exact model are for sale on Reverb right now — what musicians actually buy and resell.
- Lineup20%
How many finishes Thomann stocks — makers expand the models that sell.
- Price15%
Where the price has moved since we started tracking in August.
- Specs15%
How completely the maker documents it.
- Maker10%
How deep the brand’s range is in this category.
Questions
Are Markbass 4x10 cabs really that heavy?
It depends. The standard cabs are hefty - expect around 55-65 lbs. Neodymium models like the Stage 104HP shave off a good 10-15 lbs, which adds up when you're moving gear every night.
Can I use a Markbass 4x10 with an amp other than a Markbass head?
Absolutely! The impedance ratings are standard, but pay close attention to wattage. Make sure your amp's wattage and impedance are compatible with the cab's specs to avoid damage.
What's the difference between the ProMag 104NF and the Stage 104HP?
The Stage 104HP uses neodymium drivers, making it lighter and slightly cleaner sounding. The ProMag 104NF uses standard drivers, giving you a bit more low-end grunt and costing less.
Do I need a DI box when using a Markbass 4x10?
Not necessarily, but it's a good idea. Many Markbass heads have built-in DI outputs, but an external DI gives you more flexibility and control over your signal.
I'm playing mostly quiet jazz gigs. Is a Markbass 4x10 overkill?
Not at all! The articulation and clarity of a Markbass cab can really shine in a jazz setting. Just be mindful of your volume levels and EQ to avoid overwhelming the mix.
