Audiotools

• Display for level indication in dBA or dBC
• Easy to read display with two-colour LEDs
• Stand-alone operation or configuration and monitoring via supplied PC software
• XLR microphone input for measuring microphone with 210 cm XLR cable (included)
• USB-B interface
• External 24 V 1 A plug-in power supply unit
• Metering according to IEC-61672-1 class 2 standard
• Dimensions (L x W x H): 276 x 130 x 64 mm

• For sound level (RMS, relative, peak), THD+N, VU & PPM, frequency, signal balance, polarity via built-in microphone
• Time and frequency sweep
• 1/3 Octave spectrum and envelopes
• Acoust. SPL and Leq measurement only available with Mini SPL (available on option 154763)
• Input: XLR and RCA
• Power supply via 3x 1.5 V AA battery (not included)
• Case on option 154773

• Redundant backup switch
• For live applications from previously recorded backing tracks
• Switches to a second backup multi-track system if an error occurs in the main path.
• Silent switching
• 8x XLR outputs
• 2x 8 Jack inputs
• 1x 8-Channel 25-pin D-Sub output
• 2x 8-Channel 25-pin D-Sub input
• Contact inputs and outputs
• Ground lift switch
• Frequency range: 20 - 20,000 Hz
• Gain: -20 dB
• Dimensions 44.5 x 15.25 x 4.5 cm
• Design: 19" / 1 HE
• Weight: 4.4 kg

• Tests 3-pin and 5-pin DMX cables for continuity
• Also suitable to test 3-pin XLR microphone cables
• Automatic test or manual pin selection
• LED display
• Power supply: 2 X AA batteries (not included)
• Dimensions: 240 x 48 x 53 mm
• Weight: 0.7 kg
• Incl. Mounting bracket

• Buzz Off
• Inputs / Outputs: Jack & RCA
• Eliminates hum disturbances due to earth or ground loops

• With seperate sender/receiver plug for testing of distant DMX-Connectors
• LED Indicator
• Including LED chart

• Sensitivity and brightness adjustable
• Either 2x XLR In to 2x XLR Out or 2x RCA In to 2x RCA Out
• Input impedance: 32 kOhm
• Output impedance: 38 ohms
• Input sensitivity: Balanced 1 KHz, In 248 mV, THD: 0.006%
• Maximum input level: Unbalanced In 500 mV
• Installation depth: 13 cm

• For recording or broadcasting telephone conversations
• Connections: Standard RJ11 jacks, 2x RCA + 1x jack outputs
• Ground lift

• For XL2
• For an efficient and fast charge of the Li-Po battery
• Incl. Replacement battery

With the CT100 almost every cable can be tested: XLR, jack mono and stereo (6.3 mm, 3.5 mm, TT), RCA connector and MIDI. Separate LEDs indicate, which input is connected to which output. LED indicators for shielding and phantom power are available as well. Next to the continuity test, the CT100 provides and intermittent test and a test tone generator.

• Micro-Processor-Controlled cable tester
• For XLR, mono- and stereo-jack (3.5 mm / 6.3 mm), TT, RCA and MIDI
• Detection and indication of intermittent contacts
• Test of phantom power and ground loops
• Build in test tone generator
• Battery operation with 2x 1,5 v AA batteries (Not included)

• With integrated pink noise generator
• For easy and quick function testing of balanced microphone cables or microphone inputs on stage
• Optical error message via LED
• Power supply via phantom power 9-48 V
• Output amplitude 100 mVpp
• 3-Pin XLR output
• Dimensions: Ø 19 mm x 74 mm
• Weight: 32 g

• With sine, pink and white noise
• Delay test signal
• Polarity test signal
• Sweep signal for every frequency range
• Cable test function
• Impedance and power measurement
• Phantom power test
• Load independent output level
• 512 MB Flash-Memory with USB terminal ( for storage of wave files and configurations )
• Graphical back-lit display
• Inputs: XLR and USB
• Outputs: XLR and RCA
• Operates with 3x 1.5 v AA batteries (not included)
• Including bumper, USB cable and hand loop
• Separately available accessories: Belt bag, power supply and cable test plug
• Optional PSU: Art.240762

• With separate sender/receiver plug for testing of distant XLR connectors
• LED Indicator
• Including table of possible LED combinations

• Suitable for NTI MR 2 / PRO

• Passive high pass filter (100Hz / 12dB)
• XLR in / out

• Stand-alone unit or as an extension to the SPL5MK2 and SPL-6 limiters
• Dimensions: 282 x 192 x 55 mm
• Weight: 2.8 kg

• To edit the speaker DSP of A218 LA and A10 LA
• Dimensions: 150 x 110 x 60 mm
• Weight: 0.2 kg

• Requires 48 V phantom power
• Rotating knob selector: Pink noise, 1 kHz tone and polarity check
• Muting between each mode
• XLR connector

• Standalone device, but can also be connected to Dateq SPL-5
• Measurements: 255 x 125 x 47 mm
• Weight: 1 kg