Small Diaphragm Condenser Microphones

• Reference Standard Series
• Wide cardioid
• 20 - 20,000 Hz
• 48 volt phantom power
• 200 ohms
• 152 db. SPL max.
• XLR connector
• Especially for acoustic guitar and overhead
• Enormous fidelity
• AC capsule system
• Handmade in Denmark

• For acceptance of audience reactions, talk shows, live concerts
• 50 - 20,000 Hz
• Mace
• 132 dB SPL maximum
• Switchable low cut
• Strongly reduced diffuse sound
• Includes foam windscreen A89MW and transport bag A89MC

• Omnidirectional
• Colour: Black

DPA 4098-DC-G-W01-015, condenser hanging and podium microhone, super-cardioid, 100 - 15.000 Hz, Sensitivity 16 mV/Pa (+- 2dB), 133 dB SPL max, 48V Phantom power necessary, 20 cm boom arm, XLR connector, colour White

• Matched pair
• Polar pattern: Cardioid
• Frequency response: 20 - 20000 Hz
• Sensitivity: 14.6 mV/Pa, -36.7 dBV/P
• Max. SPL: 135 dB
• Low cut: 80 Hz (12 dB/oct)
• Pad switch: -12dB
• Dynamic range: 115 dB
• Switchable sound characteristic: Air/Flat
• Dimensions: 24 x 140 mm
• Weight: 66 g
• Colour: Black
• Incl. 2 microphone clips, 2x windshield and carrying bag

• Characteristic: Supercardioid / Lobar
• Frequency range: 40 - 20,000 Hz
• Max. SPL (P48): 132 dB
• Max. SPL (battery): 126 dB
• Power supply via 48 V phantom or 1.5 V AA battery up to 150 hours
• Dimensions: 256 x 20 mm
• Weight: 128 g
• Includes KA600 cable, MZS 600 boom mount, MZW 600 foam windscreen and carrying bag

• Directional characteristic: Cardioid
• Frequency response: 20 - 20,000 Hz
• Flexible gooseneck for an easy instrument setup
• 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)
• Gooseneck length: 130 mm
• Cable length: 2 m
• Easy to install and can be used with different instrument clips (not included, must be ordered separately)
• Includes an XLR phantom power adapter (phantom power required) and a foam windshield

• With 16 mm capsule
• Cardioid characteristic
• Frequency response 50-20000 Hz
• 48V Phantom power required
• With low cut (-3 dB @ 75 Hz o. 150Hz) and pad switch (-10 dB o. -20dB)
• Sensitivity: -42 dB (7.9mV/Pa)
• Max. SPL: 135 dB
• Includes windscreen and shock mount
• In a case

• HF Technology with vacuum-sealed electronics (Conformal Coating)
• Extremely climate-resistant and insensitive to interference
• Polar pattern: Supercardioid
• Maximum sound pressure level: 130 dB (1.0% THD)
• Equivalent noise level: 10 dBA
• Frequency response: 80 - 20000 Hz (±3 dB)
• Frequency response: 20 - 20000 Hz
• Sensitivity: 66 mV/Pa
• Output impedance: 25 Ohm
• Requires +48 V Phantom power 2 mA
• Aluminium housing
• Dimensions (length x diameter): 203 x 19 mm
• Weight: 76 g
• Includes PG2-R pistol grip with Rycote boom mount, PG2-R Pro special cable, WS10 foam windscreen and WS10 deluxe windscreen, RM5 microphone clamp and ZP1 carrying case
• Suitable case: Article no. 486815 (not included)

The MK 41 is strongly directional. Sound arriving from off axis is attenuated even more than with a cardioid. The pickup is “drier” and less susceptible to acoustic feedback than any other SCHOEPS capsule type (a loudspeaker should not be located directly along the rear axis of the microphone, however).

Its directivity is highly independent of frequency, so that even sounds arriving off axis and reverberant sound are registered without colouration. Consequently, even distant placement of the capsule produces a very natural sound pickup. This is a real advantage over interference-tube “shotgun” microphones, whose directivity is very frequency-dependent – exceeding that of a supercardioid only at higher frequencies. Interference-tube microphones are notoriously sensitive to their position in a room, where the shifting patterns of reflections cause corresponding shifts in sound color. Thus the MK 41 are surprisingly effective, space-saving alternatives to shotgun microphones – and being small, they can often be placed closer to the sound source.

An M/S microphone arrangement can be set up at quite some distance from the sound source if an MK 41 is used for the “M“ channel.

• Super-cardioid
• High directivity, comparable to mid frequencies with standard (short) shotguns
• High frequency independence of the polar diagram
• Frequency range: 40 Hz - 20 kHz
• Sensitivity: 13mV/Pa
• Equivalent noise: A-weighted: 16 dB-A
• CCIR: 24 dB
• Noise ratio, A-weighted: 78 dB A
• SPL (at 0.5% THD): 132 dB
• Surface: Matte grey
• Suitable for CMC 6 Pre-Amp

• Polar pattern: super cardioid
• Internal lithium battery
• Up to 150 hours operating time
• Charging time under 2 hours
• Charging via micro USB
• Robust and climate proof
• High sensitivity: 25 mV
• Low inherent noise: 16 dBA
• Phantom power: 12 V, 24 V, 48 V
• Electric buttons for high pass filter: 75 Hz
• Pre-attenuation (-10 dB) and presence boost
• Length: 27.8 cm
• Diameter: 2.2 cm
• Weight: 176 g
• Incl. clamp RM5, foam wind shield WSNTG4, micro USB cable

• Directional characteristic: Cardioid
• Frequency response: 20 - 20,000 Hz
• Sensitivity: 19 mV/Pa (-34.5 dBV)
• Max. SPL (sound pressure level): 136/156 dB SPL (0/20 dB pad)
• Switchable pad: 0 dB, 20 dB
• Dimensions (H x D): 120 x 23 mm
• Weight: 128 g

Note: Requires 48 V phantom power.

• Stereo tuned pair
• Polar pattern: Cardioid
• Transmission range: 25 Hz - 20 kHz
• Impedance:
• Impedance:
• Equivalent sound pressure level: 16 dB-A
• Max SPL for 0.5% THD @ 1000Hz: 125 dB
• Power supply: Phantom power 48V
• Connection: 3-pin XLR
• Colour: Black
• Incl. micro clamps, stereo microphone holder and wooden case

• Small-diaphragm condenser microphone with XLR connector
• For speech and voice-over recordings in broadcast quality
• Ideal for recording, streaming, podcasting, interviews, gaming, web conferencing and content production
• Polar pattern: cardioid
• Frequency response: 20 - 30,000 Hz
• Max. sound pressure level: 139 dB
• Signal-to-noise ratio: 79 dB A-weighted
• Off-axis attenuation to minimise room noise
• Stainless steel windscreen with integrated pop filter
• Dimensions (L x D): 131 x 41 mm
• Weight: 680 g
• Colour: Stainless steel
• Includes Triad-Orbit M2-R adapter with ball joint for mounting on microphone stand or boom arm
• Developed and manufactured in the USA

Note: requires 24 - 48 volt phantom power

• Directional characteristic: Cardioid
• Max. SPL: 135 dB
• Sensitivity: 18.8 mV / Pa
• Dynamic range: 115 dB (A)
• Requires +48 V phantom power
• Dimensions (Ø x L): 24 x 83 mm
• Weight: 44.6 g

• Characteristics: Super-cardioid / lobar
• Acoustic operation: Interference receiver
• Frequency range: 20-20.000 Hz
• Nominal impedance: 150 Ohm
• Sensitivity: 18 mV/Pa
• Bass roll-off / High pass filter
• Port: XLR
• Diameter: 21 mm
• Length: 226 mm
• Weight: 145 g
• Requires 48 V Phantom power
• Incl. foam windscreen
• Colour: Black

• Polar pattern: Cardioid
• Frequency response: 20 - 25000 Hz
• Class-A amplifier
• Max. SPL: 145 dB SPL
• Dimensions (L x D): 165 x 22 mm
• Weight: 160 g
• Incl. MC1 microphone holder

Note: Requires 48 V phantom powering