Large Diaphragm Microphones

• With REDD.47 preamp
• Polar pattern: Cardioid and omni
• -10 dB pad switch
• Phase switchable
• Gain switchable (in 3 dB steps from +4 to +33 dB)
• Incl. microphone shock mount, Mogami connection cable and transport case

Bundle offer comprising

• Dynamic broadcast microphone

• Hypercardioid polar pattern to minimise ambient noise
• Switchable low-cut and mid-range boost (6 kHz -10 kHz)
• Output: 3-pin XLR
• Sensitivity: -56 dB +/- 3 dB
• Frequency response: 20 Hz - 20 kHz
• Output impedance: 250 ohms
• Microphone dimensions (L x Ø): 172 x 53 mm
• Weight 700 g
• Colour: Black
• Includes shock mount, pouch, and wind guard

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Sontronics STC-3X Pack Silver
• With elastic suspension
• With pop protection
• Incl. 5 m XLR cable
• With microphone bag

Specifications STC-3X

• Multi-pattern large diaphragm microphone (omnidirectional, cardioid, figure-8)
• 1" Gold-plated double membrane
• Ideal for voice and vocals, acoustic guitar, piano, drums, percussion
• High transparency
• Open, silky sound
• 3-Stage high-pass filter (linear, 75 Hz - 150 Hz)
• 3-Stage PAD (0dB, -10 dB, -20dB)
• Frequency range: 20 - 20,000 Hz
• Max. SPL 125 dB
• Impedance: 200 ohms
• Dimensions (H x W x D): 194 x 53 x 53 mm
• Weight: 640 g
• Colour: Silver

Stereoset consisting of two matched condenser largediaphragm microphones

• Successor to the C 414B-TLII
• Now with 9 switchable directional characteristics (cardioid, wide-cardioid, hypercardioid, omnidirectional, figure-8 + 4 intermediate positions)
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 140 dB(SPL) max
• Improved details above 4kHz
• Lock mode to save the settings
• Peak-Hold display
• Status LEDs
• 3-Way switchable bass cut filter (0/40/80/160 Hz)
• 3 Preattenuation pads (0/-6/-12/-18 dB)
• Microphone capsule: CK12
• Transformerless XLR Output (FET)
• Incl. elastic mounting (H85), windshield (W414X) and aluminium case

• Set consisting of STC-2, spider, pop shield, XLR cable (3 m) and storage bag
• Polar pattern: cardioid
• 1" Capsule
• Frequency response: 20 - 20,000 Hz
• Low-cut filter
• Adjustment: -10 dB
• Sensitivity: 12 mV / P a -38 dB ± 2 dB
• Max. SPL: 120 dB
• Impedance: = 200 Ohm
• Requires a 48 V phantom power
• Connection: 3-pole XLR
• Dimensions of the microphone (H x W x D): 194 x 53 x 53mm
• Weight: 1100 g
• Colour: Silver

• Sontronics STC-3X
• Elastic suspension
• Pop filter
• 5m XLR cable
• Microphone bag

Data for the STC-3X:

• Multi-pattern large diaphragm condenser microphone (omnidirectional, cardioid, figure eight)
• 1" Gold-sputtered dual-diaphragm
• Ideal for speech and vocals, acoustic guitar, piano, drums, percussion
• High transparency
• Open, silky sound
• 3-Stage high-pass filter (linear, 75 Hz - 150 Hz)
• 3-Stage pad (0dB, -10dB, -20dB)
• Frequency range: 20 Hz - 20 kHz
• Max. SPL (sound pressure level): 125 dB
• Impedance: 200 Ohm
• Dimensions (H x W x D): 194 x 53 x 53 mm
• Weight: 640 g
• Colour: Black

• Double diaphragm capsule with gold-coated membranes
• Selectable directional characteristics: omnidirectional, cardioid or figure eight and all intermediate levels
• Bus-powered via USB-C
• Does not require a microphone preamplifier or audio interface
• Latency-free monitoring
• Built-in FPGA for real-time calculation of microphone modeling and studio effects
• 24 Bit / 192kHz A / D converter
• Headphone output (3.5 mm stereo jack) with high-quality D / A converter (S / N: 112 dB)
• Frequency response: 20 - 20000 Hz
• Max. sound pressure level: 116 dB
• Power requirement: 5V / 500mA
• Control via software control panel with studio and broadcast presets
• Dimensions (L x D): 219 x 53 mm
• Weight: 550 g
• Includes table stand, elastic holder, pop filter, case and USB cable

Included microphone emulations:

• Berlin 49T
• Berlin 57
• Berlin 87
• Berlin 67
• Berlin M103
• Vienna 12
• Vienna 414
• Tokyo 800T
• Oxford 4038
• Sacramento 121R

Included studio effects:

• Auraverb
• Reel to Reel
• PowerGate
• PowerEx
• VEQ-1A
• VEQ-HLF
• BAE-1073
• VEQ-55A
• Lang-PEQ2
• VEQ-4K BLACK
• Master De-esser
• BA-6A
• FET-A76
• VCA160
• Liverpool
• Stay-Levin
• ALT-436C
• Gyratec IX
• VPA 76
• BAE-1073MP
• RD-47
• BA-31
• Emulations can be used natively (requires Pace iLok 3 Art. 401447, not included)

Specifications:

• Supported formats: AAX, VST, AU
• System requirements: from Mac OS X 10.11, Windows 10, 8 GB RAM (minimum: 4 GB), USB 2.0 port

• For home and project studios
• Polarn pattern: Supercardioid
• Frequency range: 30 - 18.000 Hz
• Impedance: 200 Ohm
• 135 dB SPL max
• 113 dB Dynamic range
• 12 - 52V Phantom power required
• XLR output
• Dimensions: 54 x 150 mm
• Weight: 400 g
• Silver housing
• Compatible with all major OSX und Windows systems - no drivers needed
• Incl. threaded adapter, stand adapter and soft bag

• Suitable for Broadcasts, Podcasts, Studio etc.
• Cardioid polar pattern reduces feedback
• Built-in pop filter and shockmount for reducing vibration noise
• Shielded against electromagnetic noise
• Frequency range: 20 to 20000 Hz
• Sensitivity: -57 DB +/- 3 DB
• Output impedance: 320 ohms
• XLR 3-pin connection
• 5/8" Thread
• Dimensions without bracket: diameter 50 mm X length 140 mm
• Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
• Weight: 450 g
• Colour: Black

The U 87 is probably the best known and most widely used Neumann studio microphone.

The U 87 is equipped with a large dual-diaphragm capsule with three directional patterns: omnidirectional, cardioid and figure-8. These are selectable with a switch below the headgrille. A 10 dB attenuation switch is located on the rear. It enables the microphone to handle sound pressure levels up to 127 dB without distortion. Furthermore, the low frequency response can be reduced to compensate for proximity effect.

• Directional characteristic: Omnidirectional, cardioid, figure-8
• Frequency range: 20-20000 Hz
• Nominal impedance: 200 Ohm
• Weight: 500 g
• Diameter: 56 mm
• Length: 200 mm
• Note: Tripod mount or elastic suspension is not included (optional accessory, available under Article Nr 125520 and 218556)

• Directional characteristic: Cardioid
• High SPL (sound pressure level) capability
• Includes a shock mount

15 Year manufacturer warranty if product is registered within 30 days after purchasing at audio-technica.com

• Polar pattern: cardioid or omnidirectional
• Max. sound pressure level: 135dB SPL
• Frequency range: 30 - 18,000 Hz
• Hi-pass filter optionally at 100 Hz or 200 Hz
• Impedance: 170 Ohm
• Sensitivity: -46 dBv
• Weight microphone: approx. 0.5 kg
• Incl. a power supply with a connection cable and a case

• Double-large diaphragm capsule: 28.25 mm
• Switchable polar pattern: cardioid, omnidirectional and figure eight
• Gain switch +10 dB
• Attenuation switch-10 dB
• Low-noise FET circuit
• Capacitors with high resolution
• Output transformer hand wound
• Circuit Design: Solid-State Low-Noise FET
• Type: Pressure gradient condenser microphone
• Frequency response: 25 - 20000 Hz
• Dynamic range: 120 dB minimum
• Impedance:
• Max. SPL: 0.5% THD @ 1000Hz: 130 dB
• Noise:
• Sensitivity: 16 mV / Pa OR -36 ± 2 dB 0 dB = 1 V / Pa 1000 Hz
• Requires 48 V phantom power
• Includes shock mount and wooden storage box

• Dynamic
• Polar pattern: Cardioid
• Neodyn membrane
• Switchable high-pass filter - 2 levels
• HF lowering
• Includes clamp and storage box

• Gold-plated 1" capsule
• Directional characteristic: cardioid
• Extremely low noise circuit design
• Requires +48 V of phantom power
• Frequency range: 20 - 20,000 Hz
• Sensitivity:-34 dB (+/- 2 dB) at 1 kHz (0 dB)
• Inherent noise: 4.5 dB(A) SPL
• Maximum sound pressure level (SPL): 138 dB at 1 kHz (<1% THD)
• Signal-to noise ratio: 88.5 dB SPL at 1 kHz (according to IEC651)
• Output impedance: 100 ohm (+/- 30% at 1 kHz)
• Connection: 3-pin XLR
• Dimensions: 189 x 54 mm
• Weight: 354 g
• Includes a shock mount with integrated pop shield and a 6 m XLR microphone cable

• Hypercardioid polar pattern to minimise ambient noise
• Switchable low-cut and mid-range boost (6 kHz -10 kHz)
• Output: 3-pin XLR
• Sensitivity: -56 dB +/- 3 dB
• Frequency response: 20 Hz - 20 kHz
• Output impedance: 250 ohms
• Microphone dimensions (L x Ø): 172 x 53 mm
• Weight 700 g
• Colour: Black
• Includes shock mount, pouch, and wind guard

• Polar pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Output impedance: 150 Ohm
• Max. SPL: 154 dB SPL
• Voltage supply: 48 ± 4 V
• Dimensions (L x Ø): 187 x 55.9 mm
• Weight: 490 g
• Colour: Champagne
• Includes stand mount and plastic case

Bundle offer comprising

• Professional large diaphragm microphone
• 1" Large diaphragm microphone with evaporated-gold dual diaphragm capsule based on the AKG Classic
• Frequency range: 20 - 20000 Hz
• Sensitivity: 20 mV / Pa
• Preattenuation pad: 20 dB
• Required phantom power: 12 - 52V
• Connection: 3-pin XLR connector
• Dimensions: 160 x Ø 55 mm
• Weight: 280 g
• Includes elastic microphone suspension holder, metal case and well-designed windshield
• Suitable microphone mount: Article Nr. 124593 (not included)

• Professional Microphone Stand

One of the most widely used microphone stands, here is the industry standard for microphone tripods. Built in 1967, the design of the 210/2 has remained almost unchanged and has to date been sold more than 2 million times.

Very sturdy mechanical parts, such as the diecast base, guarantees a long life even under harsh conditions on the road. The adjustable boom arm and generous height-adjustment makes it also very suitable for musicians who also need to sing.

• Colour: Black
• The industry standard
• With adjustable boom arm
• Diecast base
• Folding tripod legs
• Wide feet construction
• Adjustable height: from 900 to 1600 mm
• Boom arm length: 840 mm
• Weight: 3.18 kg

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

Bundle offer comprising

• Large Diaphragm Condenser Microphone 
• Polar pattern: Cardioid 
• Signal-to-noise ratio: 90 dB (A)
• Max. sound pressure level: 136 dBSPL, 0 dB pre-attenuation
• Sensitivity: 41 mV / Pa, -28 dBV / Pa
• Pad switchable in three steps: 0 dB, -6 dB and -12 dB
• Low cut switchable in three steps: linear, 80 Hz (6 dB / octave) and 160 Hz (6 dB / octave)
• Dimensions: 158 x 52 x 36 mm
• Weight: 371 g

• Microphone Stand with Boom Arm
• Can be folded very compactly
• Length adjustable from approx. 0.68 - 1.56 m
• Boom arm length: 60 cm
• Boom arm joint can be fixed with only one screw
• 5/8" threads
• Weight: 2.1 kg
• Colour: Black

Includes:

• 2 x TLM 103 (mt) large diaphragm microphones with cardioid polar pattern
• 2x EA1 (mt) Microphone suspension
• 1x Aluminium case - suitable for 2 microphones and 2 shock mounts