the t.amp

• 2x 910 W/ 4 ohm
• 2x 590 W/ 8 ohm
• 2x 1200 W/ 2 ohm
• 1x 1800 W/ 8 ohm (bridge mode)
• 2400/ 4 Ohm (bridge mode)
• XLR Input and output
• Speaker twist output
• Dimensions: 485 x 370 x 97 mm
• 19" / 2 RU
• Weight: 10.4 Kg

• Power: 2 x 1430 W at 4 ohm, 2 x 950 W at 8 ohm, 1 x 2860W at 8 ohm bridged (@1kHz, THD
• Frequency range: 20 Hz - 20,000 kHz
• XLR input and output
• Input sensitivity: 0.77 V
• Outputs: Speaker Twist and binding posts
• Protected circuit design: DC
• Short circuit protection
• Over temperature protection
• Limiter
• Amplifier class: H
• Mains power: 230 V, 50 Hz
• Dimensions (W x D x H): 482 (19") x 362 x 88 mm
• Design: 19" / 2 U
• Weight: 16 kg

• Output: 2 x 1200 W at 4 ohm, 2 x 800 W at 8 ohm, 1 x 2400 W at 8 ohm bridged (@ 1 kHz, THD)
• Frequency response: 20 - 20,000 Hz
• XLR input and output
• Input sensitivity: 0.77 V
• Outputs: Speaker Twist and binding posts
• Protected circuit design: DC
• Short-circuit protection
• Over temperature protection
• Limiter
• Amplifier class: H
• Mains power: 230 V, 50 Hz
• Dimensions (W x D x H): 482 (19") x 362 x 88 mm
• Design: 19" / 2U
• Weight: 15.28 kg

• 2 x 75 W at 4 ohms
• 2 x 45 W at 8 ohms
• Balanced inputs with XLR and jack
• Bridgeable
• Speaker Twist and terminal connections for speaker out
• All protection circuits including Softstart
• Switchable input level of -0 +4 db
• Damping factor > 150
• For all applications where no fan is desired
• 19" Rack mount 1U, depth 33 cm
• Weight: 7.5 kg

• Power: 2x 500 W at 4 Ohm, 2x 350 W at 8 Ohm, 1 x 1000W bridged at 8 Ohm (@ 1 kHz, THD
• Frequency range: 20 - 20,000 Hz
• Inputs: XLR, jack (balanced)
• Outputs: Speaker Twist and binding posts
• Protected circuit design: DC
• Short circuit protection
• Protection against overheating
• Limiter
• Standby circuit
• Mains: 230 V / 50 Hz
• Dimensions (W x D x H): 482 x 375 x 88 mm
• Format: 19" / 2 U
• Weight: 12.8 kg

• Class D
• Power: 4x 500 W at 4 Ohm, 4x 250 W at 8 Ohm
• Built-in DSP
• 4 XLR inputs
• 4 Speaker twist outputs
• Format: 19" / 1 U
• Dimensions: 483 x 460 x 44 mm
• Weight: 8.0 kg

• Power: 2x 520 W @ 4 O, 2x 380 W @ 8 O
• Input sensitivity: 0.775 V
• Slew rate: 40 V/µs
• Damping factor 300:1/ 1kHz/ 8 O
• THD:
• Short circuit protection
• With limiter
• Not temperature controlled
• Inputs: jack and XLR
• Outputs: speaker twist and speaker terminal
• Dimensions (W x H x D): 483 x 103 x 475 mm
• Format: 19"/ 2 U
• Weight: 16.4 kg

• 2x 670 W/ 4 Ohm
• 2x 450 W/ 8 Ohm
• 2x 800 W/ 2 Ohm
• 1x 1380 W bridge at 8 Ohm
• 1x 1600 W bridge at 4 Ohm
• XLR input and output
• Speaker Twist output
• Protected circuit design: Audio limiter, temperature und short circuit
• Dimensions: 484 x 350 x 97 mm
• 19"/ 2 RU
• Weight: 10.4 kg

Bundle offer comprising

• Complete PA System
• 4 Channel powered mixer
• Power rating: 80 Watt sine
• 4 Symmetric inputs - total 10 inputs
• Built-in spring reverb
• External effects insert
• Equalizer in each channel
• 3-Band sum EQ
• Tape in/ out
• 2 loudspeakers 10" with tweeter
• Dimensions amplifier (W x H x D): 47 x 15 x 28 cm
• Dimensions loudspeakers (W x H x D): 35 x 45 x 23.5 cm
• Weight amplifier: 8.3 kg
• Weight loudspeaker: 9 kg
• Incl. microphone, microphone and loudspeaker cables
• Fitting microphone clamp: Article Nr 105920 (not included)

• Professional Speaker Stand Set
• Material: Aluminium
• At maximum height can hold up to 30 kg centric load
• Height: 1.25 m - approx. 2.00 m
• Pole diameter: 35mm
• Weight (per piece): 2.16 kg
• Total weight including carry bag (without packaging): 4.73 kg
• Colour: Black
• Set of two stands, includes carry bag

• 2x 1500 W/ 4 Ohm
• 2x 1000 W/ 8 Ohm
• 1x 2865 W/ 8 Ohm (bridge mode)
• XLR input and output
• Speaker twist output
• Dimensions: 483 x 88 x 455 mm
• Weight: 12 kg

• RMS power: 2x 850 W @ 4 O, 2x 570 W @ 8 O
• Input sensitivity: 0.775 V
• THD:
• Slew rate: 40 V/µs
• Damping factor: 350:1/ 1kHz/ 8 O
• Short circuit protection
• Limiter
• Inputs: jack and XLR
• Outputs: speaker twist and speaker terminal
• Installation depth: 44cm
• Format: 19"/ 2 U
• Weight: 17.5 kg

• 4x 490 W/ 8 Ohm
• 4x 810 W/ 4 Ohm
• 4x 930 W/ 2 Ohm
• 2x 1600 W/ 8 Ohm (bridge mode)
• 2x 1800 W/ 4 Ohm (bridge mode)
• XLR inputs and outputs
• Speaker Twist outputs
• Protection circuits: audio limiter, temperature and short circuit
• Dimensions: 488 x 370 x 97 mm
• Size: 19" / 2 RU
• Weight: 10.7 kg

• Class D
• 4 x 500 W @ 4 Ω
• 4 x 250 W @ 8 Ω
• Frequency range: 20 Hz to 20 kHz
• Connections: XLR inputs, speaker twist out
• Temperature controlled
• Low rack installation depth (only 240 mm)
• Design: 19"/ 1 U
• Weight: 4.6 kg

• Suitable for PA4080 KB
• Size: 12"
• Impedance: 8 Ohms
• Rated power: 50 W
• Celestion Truvox 1215 T5229A

• Power: 4x 130 W per channel at 8 ohm, 4x 200 W per channel at 4 ohm
• Frequency response: 20 - 20000 Hz
• Input: XLR
• Output: Speaker Twist
• For input channels 1 and 2 as well as 3 and 4 bridged use is possible via switch
• Protection circuit: DC
• Short circuit protection
• Overheating protection
• Limiter
• Standby switch
• Voltage: 230 V, 50 Hz
• Dimensions: (W x D x H): 482 x 408 x 88 mm, 19" / 2 U
• Weight: 12.9 kg

• 4 Channel powered mixer
• Power rating: 80 Watt sine
• 4 Symmetric inputs - total 10 inputs
• Built-in spring reverb
• External effects insert
• Equalizer in each channel
• 3-Band sum EQ
• Tape in/ out
• 2 loudspeakers 10" with tweeter
• Dimensions amplifier (W x H x D): 47 x 15 x 28 cm
• Dimensions loudspeakers (W x H x D): 35 x 45 x 23.5 cm
• Weight amplifier: 8.3 kg
• Weight loudspeaker: 9 kg
• Incl. microphone, microphone and loudspeaker cables
• Fitting microphone clamp: Article Nr 105920 (not included)

• RMS power: 2x 1200 W @ 4 Ohm, 2x 760 W @ 8 Ohm
• Input sensitivity: 0.775 V
• THD:
• Slew rate: 60 V / µs
• Damping factor: 500:1/ 1 kHz / 8 Ohm
• Short circuit protection
• Limiter
• Fan (not temperature controlled)
• Inputs: Jack and XLR female
• Outputs: Speaker twist and speaker terminal connection
• Installation depth: 44 cm
• Format: 19" / 2U
• Weight: 19.7 kg

• 2x 100 W at 4 ohms
• 2x 65 W at 8 ohms
• Balanced inputs with XLR and jack
• Bridge mode possible
• Speaker Twist and binding posts for speaker out
• All protective circuits including soft-start
• Input level switchable from -0 to +4 dB
• Damping factor > 150
• Without fan
• Input sensitivity switchable from 0.775 V (RMS) to 1.4 V RMS, or to 26 dB gain
• 1 RU, 33 cm deep
• Slew rate: 35 V/µs
• Weight: 7.5 kg

• Power: 50 W / 4 Ohm RMS
• For fixing to the back of small, passive speakers
• Input: Neutrik combo-socket (XLR/jack)
• Output via short cable with open cable ends for direct connection to the speaker terminals
• Adjustable input level
• Power amp unit is fixed to speaker housing with screws
• Power cable available separately (optional): Article Nr 101546

• With low rack installation depth of just 308 mm
• Power: 2x 190 W at 4 Ohm, 2x 120 W at 8 Ohm, 1x 380 W at 8 Ohm bridged (@1 kHz, THD
• Frequency range: 20 - 20,000 Hz
• Damping factor: >120
• Inputs: XLR, jack (balanced) and RCA
• Outputs: Speaker Twist and binding posts
• Protective circuits: DC, short circuit protection, overheating protection
• Switchable limiter
• Mains voltage: 230 V, 50 Hz
• Dimensions (W x D x H): 482 x 308 x 88 mm
• Rack size: 19" / 2 RU
• Weight: 8.6 kg