Rode

• Two movable Rycote holders
• Integrated Mogami XLR connecting cables
• Angle adjustable pistol grip with XLR connector in the base
• Suitable for Rode NTG-1, NTG-2, NTG-3 and other shotgun microphones up to a length of 325 mm
• Incl. fur windshield dead wombat

• 1 microphone / instrument combo input via XLR / 6.3 mm jack
• 24-bit / 96 kHz
• Switchable direct monitoring of the recording signal
• Switchable phantom power +48 V
• Gain control with signal LED
• 2 line outputs via 6.3 mm jack balanced
• Stereo headphone jack via 6.3 mm jack
• Power supply via USB
• Dimensions: 124 x 100 x 38 mm
• Weight: 560 g
• Includes USB C / A cable

• For Camcorder / video recorder
• Real condenser microphone
• Power supply via 9V battery
• Elastic suspension of Rycote and hot shoe adapter for the camera
• Robust ABS housing
• Foam windscreen (removable)
• Directional characteristic: Super-cardioid
• Frequency range: 40 / 20,000 Hz
• Noise ratio: 20 dB (A) SPL
• Max. SPL: 134 dB SPL
• Dynamics: 114 dB
• Weight: 176 g without battery
• Port: 3.5 mm stereo jack (mini jack)

Bundle offer comprising

• Vocal Recording Set

Scope of delivery:

• Rode NT-1 A large diaphragm microphone.
• Deluxe SM6 spider with integrated fabric pop shield
• 6 m XLR cable
• Dust bag
• Matching case: Art.486805 (not included in delivery)

Technical data NT1-A:

• 1" Large diaphragm microphone
• Polar pattern: Cardioid
• Frequency response: 20 - 20,000 Hz
• Max. sound pressure level: 137 dB
• Output impedance: 100 Ohm
• Gold-plated output contacts
• Dimensions (H x W x D): 190 x 50 x 50 mm
• Weight: 326 g

Note: requires 48 V phantom power.

• Absorber and Diffuser for Microphones
• Reduces the transmission of unwanted room effects such as reflections, background noise and echoes via the microphone
• Portable and equally suitable for studio, live applications, vocal and instrument acceptance
• The 5 segments of the screen can be opened and closed in different positions and can therefore be easily adapted to the shooting situation
• Can be mounted on any standard microphone stand or placed directly on a table top without a tripod
• Width: 16 - 80 cm (each segment is 16 cm wide)
• Height: 32 cm
• Weight: Approximately 2.70 kg

• Microphone Stand with Boom Arm
• Cast base with foldable feet
• Metal tommy screw on the boom joint
• 3/8" Threads for microphone clamp
• Includes 3/8" to 5/8" thread adapter
• Height adjustable from 105 - 170 cm
• Adjustable arm: 75 cm
• Colour: Black

Bundle offer comprising

• Vocal Recording Set

Scope of delivery:

• Rode NT-1 A large diaphragm microphone.
• Deluxe SM6 spider with integrated fabric pop shield
• 6 m XLR cable
• Dust bag
• Matching case: Art.486805 (not included in delivery)

Technical data NT1-A:

• 1" Large diaphragm microphone
• Polar pattern: Cardioid
• Frequency response: 20 - 20,000 Hz
• Max. sound pressure level: 137 dB
• Output impedance: 100 Ohm
• Gold-plated output contacts
• Dimensions (H x W x D): 190 x 50 x 50 mm
• Weight: 326 g

Note: requires 48 V phantom power.

• Microphone Stand with Boom Arm
• Cast base with foldable feet
• Metal tommy screw on the boom joint
• 3/8" Threads for microphone clamp
• Includes 3/8" to 5/8" thread adapter
• Height adjustable from 105 - 170 cm
• Adjustable arm: 75 cm
• Colour: Black

• Polar pattern: Omnidirectional
• Frequency range: 60 - 18,000 Hz
• Max. SPL: 110 dB
• Rode MiCon connector for optional plug system
• Weight: 1 g
• Colour: Black
• Optional adapter available: MiCon 1-5

Included:

• Transport box
• Pop filter
• Mini fur wind shield
• Cable
• Cable clip
• Installation tool
• Cleaning cloth

• Suitable for all iOS devices with Lightning connector for direct plugging
• 1/2" Condenser capsule
• Polar pattern: Cardioid
• Built-in preamp with D / A converter (24-bit / 48 kHz)
• Frequency range: 20 - 20,000 Hz
• Self-noise: 19.5 dBA
• Max. sound pressure level: 115 dB
• Headphone output: 3.5 mm mini jack on the back
• Aluminium housing with scratch-resistant ceramic coating
• System requirement: iOS 11
• Dimensions (W x H x D): 73.5 x 25.7 x 20 mm
• Weight: 28 g
• Includes clip and deluxe fur windshield

Note: iPhone and earbuds not included.

Bundle offer comprising

• Condenser Microphone
• For stage and studio operation
• Elastically mounted 3/4" true condenser capsule - externally polarized
• Cardioid
• Frequency range: 20 - 20,000 Hz
• Peak SPL: 140 dB
• Sensitivity: 12 mV
• Inherent noise: 16 dBA
• Operated with 48 V phantom power or 9V battery (not included)
• On/ off switch with battery status LED
• Address type: front
• Satined nickel-plated metal cast housing
• Robust windscreen
• Effective shielding RF interference
• For outdoor recording and stage use
• Ideal for recording choir, brass orchestra and other acoustic instruments
• Thanks to good structure-borne noise suppression it can also be used as moderation microphone
• Length: 20.6 cm
• Diameter: 3.2 cm
• Weight (without battery): 371 g
• Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case

• Universal Microphone Shock Mount
• For all microphones with diameter between 20 - 40 mm
• Inner thread: 5/8"
• Weight: 148.5 g

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• Small and lightweight
• Integrated TRRS plug for connection to the headset jack
• Front-facing or selfie mode audio recording depending on the plug-in direction
• Built-in 3.5mm headphone jack for monitoring during recording and playback
• 1/2" Condensor capsule
• Polar pattern: Cardioid
• Frequency range: 100 - 20,000 Hz
• Sensitivity: 22 mV
• Self-noise: 20 dBA
• Max. sound pressure level: 140 dB
• Metal housing
• Dimensions: 38 x 21 x 80 mm
• Weight: 34 g
• Includes attachable fur windshield

• 2 Adapter cables (2 x XLR or stereo mini jack). Cable length XLR 5pin to 2x XLR 3pin = 2.3 meters
• In a plastic case

Technical specifications:

• Stereo microphone with 90 ° X / Y stereo array. On each side of a small diaphragm condenser microphone capsule is located
• Capsule size: 0.5" (13 mm)
• Active Electronics: JFET impedance converter
• Pickup Pattern: Cardioid per capsule
• Output Impedance: 200 Ohms per side
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: -38 dB re 1 V / Pa +/- 2 dB or 12mV / Pa at 1 Pa = 94 dB SPL
• Noise ratio: : 16 dB SPL (A-weighted per IEC268-15).
• Max. Output: +13.9 dBu @ 1% THD into 1KΩ
• Dynamic range: : 128 dB
• Max SPL: 143 dB @ 1% THD into 1KΩ
• Signal / noise ratio: 78 dB
• Power supply: 4 mA, P48 (38V-52V) 2 mA, P24 (20V-26V) 2.8 mA, P12 (10.8V-13.2V) 2.4 mA via 9 V battery
• Packaging weight: 2.3 kg (Mic alone 480 g)
• Includes 10 years manufacturers warranty

Bundle offer comprising

• Shot Gun Microphone
• Ideally for film/ TV/ video
• Polar pattern: super cardioid
• XLR Connector
• Operated with 1.5 V alkaline battery or 48 V phantom power
• Frequency range: 20 - 20.000 Hz
• Max. SPL: 131 dB
• Output impedance: 250 Ohm
• Dimensions: 280 x 22 x 22 mm
• Weight: 161 g
• Incl. windshield and clamp

• Windscreen
• For VideoMic (not stereo) and NTG1/2 or similar shotgun microphones

• Ideally for film/ TV/ video
• Polar pattern: super cardioid
• XLR Connector
• Operated with 1.5 V alkaline battery or 48 V phantom power
• Frequency range: 20 - 20.000 Hz
• Max. SPL: 131 dB
• Output impedance: 250 Ohm
• Dimensions: 280 x 22 x 22 mm
• Weight: 161 g
• Incl. windshield and clamp

• For NT1000, NT2000, NTK, K2, Classic II
• Reduces the transmission of vibrations

• TRS Mini jack socket (3.5 mm) to XLR 3M
• Integrated voltage transformer from phantom power (12 - 48 V) to plug-in power (4V)
• For connecting VideoMic, VideoMic GO, VideoMicro, VideoMic Pro, VideoMic Pro+, and VideoMic NTG to XLR microphone inputs, as well as for HS2, RODELink LAV, and Lavalier GO
• Integrated transformer delivers a balanced output signal
• Allows interference-free operation even with long microphone cables
• Jack socket with external threads for locking (for jack plugs with screw caps)
• Dimensions (L x D): 70 x 21 mm
• Weight: 84 g
• Includes attachment clip

Set consists of:

• Rode NT2-A microphone
• Deluxe SM6 shock mount with integrated pop filter
• 6 m XLR cable
• Dust cover
• Suitable case available under Articlr Nr 486805 (not included)

Technical data of the microphone:

• Professional 1" large diaphragm microphone
• Switchable directional characteristic (omnidirectional, figure-8, cardioid)
• 3-Position high-pass (flat, 40 Hz, 80 Hz); 3-Stage pad switch (flat, -5 dB, -10 dB)
• Frequency range: 20 Hz - 20,000 kHz
• Max. SPL (sound pressure level): 147 dB
• Requires 48 V phantom power
• Dimensions (H x W x D): 209 x 55 x 55 mm
• Weight: 860 g

• Compact complete system with transmitter and receiver module
• 2.4 GHz Band
• TX terminal transmitter with an integrated microphone
• Polar pattern: omnidirectional
• Max. sound pressure level: 100 dB (1 kHz @ 1m)
• Inherent noise: 22 dBA
• Frequency response: 50 - 20,000 Hz (internal microphone)
• Range: 200 m (free line of sight)
• Transmitter module with internal memory and recording function (up to 40h audio recording)
• 2-Channel RX receiver for clip-on or flash shoe mounting
• Switchable level adjustment (0 dB, -12 dB, -24 dB)
• Microphone input: 3.5 mm jack
• Camera connection: 3.5 mm jack
• USB-C socket for Mac / PC or Android and iOS devices (optional cable required, not included in the delivery)
• Power supply: internal LiPo battery (TX and RX)
• Battery capacity: up to 7h (charging via USB-C jack)
• Compatible with Rode Connect and Rode Central (free software / app)
• Dimensions each (W x D x H): 46 x 44x 19 mm
• Weight each: 32 g
• Incl. 3.5 mm TRS connection cable (SC5), 2 USB-C to USB-A cables, 2 head windscreens and 1 neoprene transport case

• Polar pattern: Super-cardioid
• Frequency range: 40 Hz - 20 kHz
• Dynamic range: 117 dB
• Maximum sound pressure level: 130 dB @ 1 KHz
• Required power supply: Phantom power 48V (4.3 mA)
• Connector: 3-pin XLR
• Dimensions: 255 x 19 x 19 mm
• Weight: 163 g
• Colour: Black
• Includes water and dust resistant aluminum cylinder for storage of the NTG-3, windscreen and RM5 microphone clip